# 100% CO2 Sensor Dev Kit

**URL:** <https://forum.digikey.com/t/100-co2-sensor-dev-kit/25899>\
**Category:** Sensors Transducers\
**Tags:** sensors-transducers, automation-and-control, gas-sensing-solutions-ltd, associated-products\
**Created:** [October 11, 2022, 2:46pm UTC](https://forum.digikey.com/t/100-co2-sensor-dev-kit/25899 "2022-10-11T14:46:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![crystalk](https://avatars.discourse-cdn.com/v4/letter/c/e36b37/32.png) [@crystalk](https://forum.digikey.com/u/crystalk)\
**Post date:** [October 11, 2022, 2:46pm UTC](https://forum.digikey.com/t/100-co2-sensor-dev-kit/25899/1 "2022-10-11T14:46:34Z")

</div>

I’ve finally found a 100% CO2 sensor here from Digi-Key that works for my application, and I’ve purchased the unit. Part number 2091-EXPLORIR-M-E-100-ND. However the unit did not come with a development kit, and I’m not an electronics person, so I need some help figuring out a board to connect to the sensor’s pins and output to a PC via USB.  
Thanks in advance,  
Crystal K

---

<div class="post-metadata">

**Author:** ![Jenny\_1307](https://avatars.discourse-cdn.com/v4/letter/j/c67d28/32.png) [@Jenny\_1307](https://forum.digikey.com/u/Jenny_1307)\
**Post date:** [October 11, 2022, 4:12pm UTC](https://forum.digikey.com/t/100-co2-sensor-dev-kit/25899/2 "2022-10-11T16:12:55Z")

</div>

Hello Crystal K., welcome to the Forum community. There are a few development kits you can take a look at. [These](https://www.digikey.com/en/product-highlight/g/gas-sensing-solutions/explorir-w-co2-sensor) are made by the same manufacturer as the sensor you chose. There are a few videos from the manufacturer that you may be interested in also, near the center of GSS’s [manufacturer’s landing page](https://www.digikey.com/en/supplier-centers/gas-sensing-solutions)