# 8715 switch mom 2pos nc **URL:** \ **Category:** Switches\ **Tags:** pushbutton-switches, cole-hersee, documentation\ **Created:** [August 20, 2025, 3:41am UTC](https://forum.digikey.com/t/8715-switch-mom-2pos-nc/59165 "2025-08-20T03:41:28Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![1dodgey68](https://avatars.discourse-cdn.com/v4/letter/1/8baadc/32.png) [@1dodgey68](https://forum.digikey.com/u/1dodgey68)\ **Post date:** [August 20, 2025, 3:41am UTC](https://forum.digikey.com/t/8715-switch-mom-2pos-nc/59165/1 "2025-08-20T03:41:28Z")
Hi, wanting to find out the diameter size of the treaded piece and length of the shaft. ---
**Author:** ![David\_1768](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/david_1768/32/9762_2.png) [@David\_1768](https://forum.digikey.com/u/David_1768)\ **Post date:** [August 20, 2025, 1:07pm UTC](https://forum.digikey.com/t/8715-switch-mom-2pos-nc/59165/2 "2025-08-20T13:07:05Z")
Hello 1dodgey68, The thread size is 1/2”-20, and the thread length is 1-5/32” long. I found a [drawing](https://www.littelfuse.com/assetdocs/8715-2d-prints?assetguid=60c5adae-050f-440b-a4b4-9c369485aa82) that shows the actuator length as 0.267” (6.78mm). ---
**Author:** ![1dodgey68](https://avatars.discourse-cdn.com/v4/letter/1/8baadc/32.png) [@1dodgey68](https://forum.digikey.com/u/1dodgey68)\ **Post date:** [August 20, 2025, 8:37pm UTC](https://forum.digikey.com/t/8715-switch-mom-2pos-nc/59165/3 "2025-08-20T20:37:36Z")
Thanks David, do you have anything similar with a 1/4" thread? I need it for a 12v dc 1a application. ---
**Author:** ![1dodgey68](https://avatars.discourse-cdn.com/v4/letter/1/8baadc/32.png) [@1dodgey68](https://forum.digikey.com/u/1dodgey68)\ **Post date:** [August 21, 2025, 12:23am UTC](https://forum.digikey.com/t/8715-switch-mom-2pos-nc/59165/4 "2025-08-21T00:23:59Z")
Thanks David, do you have anything with a 1/4" thread? I need for a 12v dc application Regards Paul Parmentier