# Alingment

**URL:** <https://forum.digikey.com/t/alingment/44937>\
**Category:** Scheme-it\
**Created:** [September 16, 2024, 3:53pm UTC](https://forum.digikey.com/t/alingment/44937 "2024-09-16T15:53:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vladimir.krakhman](https://avatars.discourse-cdn.com/v4/letter/v/3da27b/32.png) [@vladimir.krakhman](https://forum.digikey.com/u/vladimir.krakhman)\
**Post date:** [September 16, 2024, 3:53pm UTC](https://forum.digikey.com/t/alingment/44937/1 "2024-09-16T15:53:23Z")

</div>

There is an alignment option for sending part back or in front, but it seems does not work. How to use it?  
Thank you,.

---

<div class="post-metadata">

**Author:** ![Curtis\_Johnson](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/curtis_johnson/32/3166_2.png) [@Curtis\_Johnson](https://forum.digikey.com/u/Curtis_Johnson)\
**Post date:** [September 16, 2024, 4:45pm UTC](https://forum.digikey.com/t/alingment/44937/2 "2024-09-16T16:45:35Z")

</div>

Hello vladimir.krakhman

Thank you for using Scheme-it.

Single-click on the object within the Scheme-it canvas, then click either “Front” or “Back” under the “Arrange” subtitle within the “Object Properties” tab.

Please let me know if this helps.

Thank you.  
Curtis