# Allowable connector types for power supply screw terminals

**URL:** <https://forum.digikey.com/t/allowable-connector-types-for-power-supply-screw-terminals/15240>\
**Category:** Power Supplies (off-board)\
**Tags:** power-supplies-external-internal-off-board, mean-well, power, associated-products\
**Created:** [July 6, 2021, 9:31pm UTC](https://forum.digikey.com/t/allowable-connector-types-for-power-supply-screw-terminals/15240 "2021-07-06T21:31:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nsemit](https://avatars.discourse-cdn.com/v4/letter/n/76d3ee/32.png) [@nsemit](https://forum.digikey.com/u/nsemit)\
**Post date:** [July 6, 2021, 9:31pm UTC](https://forum.digikey.com/t/allowable-connector-types-for-power-supply-screw-terminals/15240/1 "2021-07-06T21:31:27Z")

</div>

I’m using an SE-600-12 power supply. To connect wires to the V+ and V- terminals on the power supply, a previous user had attached small connectors shaped like an upside-down U to the wires, and plugged these connectors into the screw terminals. By googling around, I think the U-shaped connectors are something like the “Insulated Fork Spade U-Type Wire Connectors” that are available for sale through Amazon. My question is, we don’t seem to have any more of these connectors around the lab; are they necessary, or can I simply shove the end of my wires into the terminals?

---

<div class="post-metadata">

**Author:** ![rick\_1976](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/rick_1976/32/1571_2.png) [@rick\_1976](https://forum.digikey.com/u/rick_1976)\
**Post date:** [July 6, 2021, 9:47pm UTC](https://forum.digikey.com/t/allowable-connector-types-for-power-supply-screw-terminals/15240/2 "2021-07-06T21:47:40Z")

</div>

Greetings,

It rather depends on one’s definition of “necessary.” Use of [connectors](https://www.digikey.com/short/h3f0ncfv) of that sort is helpful with stranded wires, to prevent stray strands from causing shorts and having the connection loosen over time. With solid wire, they’re not quite as compelling.

---

<div class="post-metadata">

**Author:** ![Steven\_14444](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/steven_14444/32/47465_2.png) [@Steven\_14444](https://forum.digikey.com/u/Steven_14444)\
**Post date:** [July 6, 2021, 9:48pm UTC](https://forum.digikey.com/t/allowable-connector-types-for-power-supply-screw-terminals/15240/3 "2021-07-06T21:48:40Z")

</div>

Welcome to the Tech Forum.

The wire can be inserted into the terminals but I would recommend using the [spade](https://www.digikey.com/en/products/filter/terminals-spade-connectors/391?s=N4IgjCBcoJwExVAYygMwIYBsDOBTANCAPZQDaIAzAKwAcMdIh1MADGAgLqEAOALlCADKvAE4BLAHYBzEAF9CAWgTQQKSKICuBYmRBUQHeSAUxEqqJu0lI5CIaPLy2bugAmuAARIiEiQdlAA) connectors to ensure the best connection depending on the type of wire that you are using.
