# Amphenol connector compatibility- strain relief vs clamp

**URL:** <https://forum.digikey.com/t/amphenol-connector-compatibility-strain-relief-vs-clamp/43407>\
**Category:** Q&A\
**Created:** [July 22, 2024, 7:19pm UTC](https://forum.digikey.com/t/amphenol-connector-compatibility-strain-relief-vs-clamp/43407 "2024-07-22T19:19:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sbsheridan](https://avatars.discourse-cdn.com/v4/letter/s/96bed5/32.png) [@sbsheridan](https://forum.digikey.com/u/sbsheridan)\
**Post date:** [July 22, 2024, 7:19pm UTC](https://forum.digikey.com/t/amphenol-connector-compatibility-strain-relief-vs-clamp/43407/1 "2024-07-22T19:19:15Z")

</div>

------Question for [BD-06BFFA-LL7001](https://www.digikey.com/en/products/detail/amphenol-ltw/BD-06BFFA-LL7001/7102689) Please Put your question below------

Hi there,

I am using this connector

> **[MS3102E14S-6S | DigiKey Electronics](https://www.digikey.ca/en/products/detail/amphenol-industrial-operations/MS3102E14S-6S/378617)**
>
> Order today, ships today. MS3102E14S-6S – 6 Position Circular Connector Receptacle, Female Sockets Solder Cup from Amphenol Industrial Operations. Pricing and Availability on millions of electronic components from Digi-Key Electronics.

To connect to the above one I use cable-mount type  
digikey.ca/en/products/detail/amphenol-industrial-operations/MS3106A14S-6P/2128403  
and  
digikey.ca/en/products/detail/amphenol-industrial-operations/97-3057-1007-1/341005

My Question:  
Is there equivalent part to MS3106A14S-6P that uses strain relief instead of clamp and tube( 97-3057-1007-1) ?  
Something like this digikey.ca/en/products/detail/conxall-switchcraft/3282-6PG-3DC/526187 but compatible with MS3102E14S-6S

Thanks in advance!  
Cheers,  
Sam

---

<div class="post-metadata">

**Author:** ![David\_1768](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/david_1768/32/9762_2.png) [@David\_1768](https://forum.digikey.com/u/David_1768)\
**Post date:** [July 22, 2024, 7:41pm UTC](https://forum.digikey.com/t/amphenol-connector-compatibility-strain-relief-vs-clamp/43407/2 "2024-07-22T19:41:56Z")

</div>

Hello sbsheridan,

Welcome to the DigiKey TechForum.  
I’m sorry, but we do not have a mating connector to MS3102E14S-6S, that has a different strain Relief, than the ones like you have used, with the clamp on the back. There are some without the bushing (tube), but will still be the same type of clamp.  
Nothing with a cable gland type compression fitting.