# Amphenol D-Sub Mating Cycles

**URL:** <https://forum.digikey.com/t/amphenol-d-sub-mating-cycles/16011>\
**Category:** D-Sub , D-Shaped Connectors\
**Tags:** amphenol-icc, faqs, interconnect, d-sub-d-shaped-connectors, connectors-interconnects\
**Created:** [August 17, 2021, 10:12pm UTC](https://forum.digikey.com/t/amphenol-d-sub-mating-cycles/16011 "2021-08-17T22:12:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ryan\_2724](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/ryan_2724/32/1716_2.png) [@Ryan\_2724](https://forum.digikey.com/u/Ryan_2724)\
**Post date:** [August 17, 2021, 10:12pm UTC](https://forum.digikey.com/t/amphenol-d-sub-mating-cycles/16011/1 "2021-08-17T22:12:06Z")

</div>

Amphenol typically lists 100 mating cycles for D-Sub contacts with gold flash plating, which is considered less than 10u" of gold.

As an example, see manufacturer response below regarding the mating cycle for Amphenol [L717DB25P](https://www.digikey.com/en/products/detail/amphenol-icc-commercial-products/L717DB25P/1242643):  
“Since the contact area plating is gold flash, we understand L717DB25P can support 100 mating cycles.”

Below is also a snippet from the [datasheet](https://signin.amphenolcanada.com/ProductSearch/Pdf/DSUB_CAT.pdf#Page=84):  
 ![image](https://global.discourse-cdn.com/digikey/original/3X/c/0/c04f42da3f5c93b8391da65c783921946fe77f8a.png)

\*This may vary contact to contact, the datasheet will have to be reviewed on each specific product.

> **Summary**
>
> L717DB25P-ND  
> CONN D-SUB PLUG 25POS SLDR CUP  
> D  
> L717DB25  
> D-Sub
