# Backshell for 854A006-103RLS4

**URL:** <https://forum.digikey.com/t/backshell-for-854a006-103rls4/27974>\
**Category:** Circular Connectors\
**Tags:** norcomp, interconnect, circular-connectors, associated-products, connectors-interconnects\
**Created:** [January 19, 2023, 9:50pm UTC](https://forum.digikey.com/t/backshell-for-854a006-103rls4/27974 "2023-01-19T21:50:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![stephen.graff](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@stephen.graff](https://forum.digikey.com/u/stephen.graff)\
**Post date:** [January 19, 2023, 9:50pm UTC](https://forum.digikey.com/t/backshell-for-854a006-103rls4/27974/1 "2023-01-19T21:50:13Z")

</div>

I am looking to attach a 854A006-103RLS4 connector to a cable but need a strain relief. Is there one available? This is from the Norcomp Vulcon series 6 pin male M8 connector.

---

<div class="post-metadata">

**Author:** ![David\_1768](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/david_1768/32/9762_2.png) [@David\_1768](https://forum.digikey.com/u/David_1768)\
**Post date:** [January 19, 2023, 10:04pm UTC](https://forum.digikey.com/t/backshell-for-854a006-103rls4/27974/2 "2023-01-19T22:04:45Z")

</div>

Welcome to the Digi-Key TechForum, stephen.graff !  
We do not list a strain relief for this connector. I checked on the manufacture’s website, and they did not list a strain relief for the connector. I believe these are designed to be overmolded, after it’s attached to a cable. The only solution I can think of, would be to use a piece of heatshrink tubing as a strain relief.

---

<div class="post-metadata">

**Author:** ![stephen.graff](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@stephen.graff](https://forum.digikey.com/u/stephen.graff)\
**Post date:** [January 20, 2023, 2:09pm UTC](https://forum.digikey.com/t/backshell-for-854a006-103rls4/27974/3 "2023-01-20T14:09:16Z")

</div>

Thanks that is what I was thinking. It is kind of odd documentation as to the use case for this device. I do not see any other type of solution for this connector. Basler has picked this connector for power and I/O for their ace 2 cameras which is our use case.