# BeagleBone-AI partition layout

**URL:** <https://forum.digikey.com/t/beaglebone-ai-partition-layout/14196>\
**Category:** Linux Discussions\
**Created:** [May 13, 2021, 6:37pm UTC](https://forum.digikey.com/t/beaglebone-ai-partition-layout/14196 "2021-05-13T18:37:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Niyaz](https://avatars.discourse-cdn.com/v4/letter/n/58f4c7/32.png) [@Niyaz](https://forum.digikey.com/u/Niyaz)\
**Post date:** [May 13, 2021, 6:37pm UTC](https://forum.digikey.com/t/beaglebone-ai-partition-layout/14196/1 "2021-05-13T18:37:06Z")

</div>

Hello, I cannot understand how rootfs is created, where is the second partition of sd card? Why kernel is copied to rootfs? It must be sitting alongside with u-boot, mlo, dtb and e.t.c. in the first partition? is not it?

---

<div class="post-metadata">

**Author:** ![RobertCNelson](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/robertcnelson/32/12_2.png) [@RobertCNelson](https://forum.digikey.com/u/RobertCNelson)\
**Post date:** [May 13, 2021, 6:42pm UTC](https://forum.digikey.com/t/beaglebone-ai-partition-layout/14196/2 "2021-05-13T18:42:51Z")

</div>

> [@Niyaz](#):
>
> It must be sitting alongside with u-boot, mlo, dtb and e.t.c. in the first partition? is not it?

Nope, on the am57xx bootrom that is not required. In our case, we store MLO/u-boot.img are in a raw location in the first 4MB of the media. Which will happily load the linux kernel, dtb from a single partition…

Regards,
