Boot BeagleBoneBlack eMMC after loading u-boot from USB0

Embedded Linux Discussions
1

Is it possible to jump to the eMMC rootfs after first loading u-boot over the USB0/RNDIS boot procedure? Assume the board will not be powered off and that it was started with the boot button held down.

I tried running distro_bootcmd but it would not boot eMMC. Yet the eMMC has a bootable partition with a valid rootfs.

2

Just patch your version of u-boot loaded over USB0/RNDIS to scan the eMMC first…

If you look in the am335x_evm board file, the microSD is scanned first, so just swap the order…

Regards,