# Cam locks

**URL:** <https://forum.digikey.com/t/cam-locks/61015>\
**Category:** Equipment, Tools & Supplies\
**Tags:** boxes-enclosures-racks, part-identification\
**Created:** [October 5, 2025, 7:39pm UTC](https://forum.digikey.com/t/cam-locks/61015 "2025-10-05T19:39:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pedalectrichybrid](https://avatars.discourse-cdn.com/v4/letter/p/cdc98d/32.png) [@pedalectrichybrid](https://forum.digikey.com/u/pedalectrichybrid)\
**Post date:** [October 5, 2025, 7:39pm UTC](https://forum.digikey.com/t/cam-locks/61015/1 "2025-10-05T19:39:09Z")

</div>

I am looking for a cam lock that has weather proof seal and a internal shaft to turn a hexagonal lock drive hole.

---

<div class="post-metadata">

**Author:** ![anthony\_14117](https://avatars.discourse-cdn.com/v4/letter/a/6a8cbe/32.png) [@anthony\_14117](https://forum.digikey.com/u/anthony_14117)\
**Post date:** [October 6, 2025, 3:14pm UTC](https://forum.digikey.com/t/cam-locks/61015/2 "2025-10-06T15:14:53Z")

</div>

Hello @pedalectrichybrid

Welcome to the TechForum

I found [0401116800002](https://www.digikey.com/en/products/detail/essentra-access-solutions/0401116800002/7688727) which used a hexagonal lock and has a rubber gasket for its seal.

---

<div class="post-metadata">

**Author:** ![pedalectrichybrid](https://avatars.discourse-cdn.com/v4/letter/p/cdc98d/32.png) [@pedalectrichybrid](https://forum.digikey.com/u/pedalectrichybrid)\
**Post date:** [October 11, 2025, 3:33am UTC](https://forum.digikey.com/t/cam-locks/61015/3 "2025-10-11T03:33:44Z")

</div>

Hello Anthony,  
Thanks for your email. I think there mahaps a miss understanding. What i need is a high security barrel cam style lock with the inside end pin to fit a 8mm hex hole. Not the key being a hexagonal key.  
Thank you again for your quick response.  
S R Hampton