# Compatible pins for this connector if needed - MHDCMR9-DB9P-K

**URL:** <https://forum.digikey.com/t/compatible-pins-for-this-connector-if-needed-mhdcmr9-db9p-k/39944>\
**Category:** Q&A\
**Created:** [March 26, 2024, 9:17am UTC](https://forum.digikey.com/t/compatible-pins-for-this-connector-if-needed-mhdcmr9-db9p-k/39944 "2024-03-26T09:17:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ccraff](https://avatars.discourse-cdn.com/v4/letter/c/5e9695/32.png) [@ccraff](https://forum.digikey.com/u/ccraff)\
**Post date:** [March 26, 2024, 9:17am UTC](https://forum.digikey.com/t/compatible-pins-for-this-connector-if-needed-mhdcmr9-db9p-k/39944/1 "2024-03-26T09:17:34Z")

</div>

------Question for MHDCMR9-DB9P-K Please Put your question below------

I can’t tell if this connector uses pins or directly soldering wires into the connector.

If it uses pins, could I get a list of compatible male pins (and female ones for the other connector so I don’t have to put another question up for them)

Thanks!

---

<div class="post-metadata">

**Author:** ![Kristof\_2649](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/kristof_2649/32/2325_2.png) [@Kristof\_2649](https://forum.digikey.com/u/Kristof_2649)\
**Post date:** [March 26, 2024, 1:13pm UTC](https://forum.digikey.com/t/compatible-pins-for-this-connector-if-needed-mhdcmr9-db9p-k/39944/2 "2024-03-26T13:13:44Z")

</div>

Welcome to the community.

The recommended Male Pin D-Sub for this backshell is PN:

[4672-MHDB9SP-ND](https://www.digikey.com/en/products/detail/mh-connectors/MHDB9SP/16984080)

It comes with Pins that are Solder Cup.

We’re currently out of stock of the recommended Female D-Sub, PN: MHDB9SS

They’re pretty standard, you could use something like the following PN in it’s place:

[L77SDE09S-ND](https://www.digikey.com/en/products/detail/amphenol-cs-commercial-products/L77SDE09S/1930962)

---

<div class="post-metadata">

**Author:** ![ccraff](https://avatars.discourse-cdn.com/v4/letter/c/5e9695/32.png) [@ccraff](https://forum.digikey.com/u/ccraff)\
**Post date:** [March 27, 2024, 7:28am UTC](https://forum.digikey.com/t/compatible-pins-for-this-connector-if-needed-mhdcmr9-db9p-k/39944/3 "2024-03-27T07:28:05Z")

</div>

Thanks! Exactly the answer I was looking for 🙂