Do you have the crimping heights for insulation an Conductor for these 2 terminals? and if avalable the pull test measurement for the comented heights.
SPAL-002T-P0.5
SPHD-002T-P0.5
Thank you in advance for your information
Hello @rvargas
Welcome to DigiKey’s Techforum,
The female contacts of this series have the Crimping heights, Strip length and the pull test measurements available on the Manual located on JST’s website. This requires a short form to fill out to obtain. Please see Link Here to obtain their manual.
The male pins you referenced SPAL-002T-P0.5 and SPHD-002T-P0.5 were not specifically specified on this manual. I would recommend reaching out directly with JST on their Contact Page