# Custom Symbol Has Detached Pins When Placed In Schematic

**URL:** <https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670>\
**Category:** Scheme-it\
**Created:** [January 27, 2022, 4:28pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670 "2022-01-27T16:28:12Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [January 27, 2022, 4:28pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/1 "2022-01-27T16:28:12Z")

</div>

Hello,

In the following project, if I add custom symbol COMBINED\_MOSFET some of the pins are detached from the symbol outline. Please can you tell me how to fix the custom symbol? I’ve tried deleting and adding the pins again but it makes no difference.

> **[Scheme-it | Free Online Schematic and Diagramming Tool | DigiKey Electronics](https://www.digikey.co.uk/schemeit/project//test-project-954c5f443a9a472d85ccb8006fa3cf17/)**
>
> Welcome to the Scheme-it | Free Online Schematic and Diagramming Tool | DigiKey Electronics Scheme-it project. Scheme-it is a free online schematic drawing tool that will allow you to produce professional looking schematic diagrams, add corresponding...

Thanks.

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [January 27, 2022, 4:42pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/2 "2022-01-27T16:42:16Z")

</div>

![custom_sym_in_editor](https://global.discourse-cdn.com/digikey/original/3X/5/6/5673919209b3011dd8be770f838ed4c19c8c986a.png)

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [January 27, 2022, 4:42pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/3 "2022-01-27T16:42:40Z")

</div>

![custom_sym_in_schematic](https://global.discourse-cdn.com/digikey/original/3X/4/8/48b11d836f21fce08f68a73bcaf6c4bf4d4ef879.png)

---

<div class="post-metadata">

**Author:** ![Cody\_Walseth](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/cody_walseth/32/18083_2.png) [@Cody\_Walseth](https://forum.digikey.com/u/Cody_Walseth)\
**Post date:** [January 27, 2022, 8:25pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/4 "2022-01-27T20:25:53Z")

</div>

@kier - I have reported this issue to the Scheme-it team to look into. To make the symbol work for now, you can manually change the pin positions using the menu on the right side of the editor. This will render incorrectly in the editor but the symbol will be placed correctly in the canvas.

 ![image](https://global.discourse-cdn.com/digikey/original/3X/9/b/9b9af39f74f2557a5f0e7ebfc78524f5013fe39f.png)

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [January 28, 2022, 7:58am UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/5 "2022-01-28T07:58:34Z")

</div>

@Cody_Walseth Many thanks!

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 2, 2022, 10:13am UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/6 "2022-02-02T10:13:35Z")

</div>

Hi Cody,

I have a more extreme example of what I think is the same problem. When I place custom symbol HV\_VOLTAGE SENSE onto the schematic and connect it, initially it looks fine:

 ![image001.png](https://global.discourse-cdn.com/digikey/original/3X/6/2/6270275f355a185e8a1ae17284a1e78a11e6392f.png)

If I Save and exit the project then return and Open the project, the VIN+ pin has been displaced south by a distance such that it has completely disappeared from the page and cannot be retrieved:

 ![image002.png](https://global.discourse-cdn.com/digikey/original/3X/f/d/fdac1028d543e5a76c2534bb7b003309104e6689.png)

I don’t think your workaround is possible in the circumstance. At the moment, I can’t use this symbol in my schematic.

Can you report it to the Scheme-It team please?

Thank you.

---

<div class="post-metadata">

**Author:** ![MikeW](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MikeW](https://forum.digikey.com/u/MikeW)\
**Post date:** [February 2, 2022, 5:24pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/7 "2022-02-02T17:24:06Z")

</div>

@kier Would you be able to share a project link so that I can take a look at it and try to reproduce the issue?

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 3, 2022, 8:32am UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/8 "2022-02-03T08:32:12Z")

</div>

Here’s the project link:

> **[Scheme-it | Free Online Schematic and Diagramming Tool | DigiKey Electronics](https://www.digikey.co.uk/schemeit/project/test-project-954c5f443a9a472d85ccb8006fa3cf17)**
>
> Welcome to the Scheme-it | Free Online Schematic and Diagramming Tool | DigiKey Electronics Scheme-it project. Scheme-it is a free online schematic drawing tool that will allow you to produce professional looking schematic diagrams, add corresponding...

---

<div class="post-metadata">

**Author:** ![MikeW](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MikeW](https://forum.digikey.com/u/MikeW)\
**Post date:** [February 3, 2022, 11:55am UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/9 "2022-02-03T11:55:31Z")

</div>

@kier Thank you! I was able to reproduce the error, and will make the development team aware of the issue. I was able to recreate the circuit using those parts on the same canvas without issue. Would you please try to start a new project and use the same parts/circuit setup?

 ![image](https://global.discourse-cdn.com/digikey/original/3X/e/8/e8965057256aa8cb78e97c7f60a7535627448885.png)

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 3, 2022, 1:19pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/10 "2022-02-03T13:19:18Z")

</div>

Thank you. Yes starting a new blank project seems to fix the issue. However, I still have the problem on my actual project. If I delete the symbol in question and its nets then add the symbol again, the problem returns.

Are you saying the issue is the project canvas rather than the symbol? I think this might be a big problem for me because it’s not feasible for me to re draw my project, it’s just too large.

---

<div class="post-metadata">

**Author:** ![MikeW](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MikeW](https://forum.digikey.com/u/MikeW)\
**Post date:** [February 3, 2022, 2:31pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/11 "2022-02-03T14:31:09Z")

</div>

@kier The issue may just be with the way the part was saved. Can you please try to delete that part/net from your schematic, and then open and resave the original custom symbol and then see if the issue persists?

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 3, 2022, 3:42pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/12 "2022-02-03T15:42:56Z")

</div>

Thanks Mike. I did as you advised:

Deleted instances of the custom symbol.

Saved project.

Edited custom symbol and saved.

Added custom symbol back to schematic.

But the problem has shifted to another instance of the component.

![image001.png](https://global.discourse-cdn.com/digikey/original/3X/b/8/b8e6dcc07ef1a7019d517627b443ba2d318946a2.png)

---

<div class="post-metadata">

**Author:** ![MikeW](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MikeW](https://forum.digikey.com/u/MikeW)\
**Post date:** [February 3, 2022, 3:50pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/13 "2022-02-03T15:50:29Z")

</div>

@kier Is the custom symbol the previous version, or the newly saved one?

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 3, 2022, 3:58pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/14 "2022-02-03T15:58:00Z")

</div>

It’s the newly saved one.

---

<div class="post-metadata">

**Author:** ![MikeW](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MikeW](https://forum.digikey.com/u/MikeW)\
**Post date:** [February 3, 2022, 4:17pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/15 "2022-02-03T16:17:29Z")

</div>

@kier Okay, the development team will take a look at it and try to get to the root of the problem. Thank you for your patience!

---

<div class="post-metadata">

**Author:** ![MikeW](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MikeW](https://forum.digikey.com/u/MikeW)\
**Post date:** [February 8, 2022, 11:45am UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/16 "2022-02-08T11:45:39Z")

</div>

@kier Would you please try the symbol again now? The issue should be resolved.

Thanks for your patience!

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 8, 2022, 1:40pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/17 "2022-02-08T13:40:49Z")

</div>

@MikeW Thank you but it’s not resolved for me. I deleted the symbol and re-added to this project:

“[https://www.digikey.co.uk/schemeit/project/test-project-954c5f443a9a472d85ccb8006fa3cf17/](https://www.digikey.co.uk/schemeit/project/test-project-954c5f443a9a472d85ccb8006fa3cf17/)”

…and it still has the issue.

---

<div class="post-metadata">

**Author:** ![Cody\_Walseth](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/cody_walseth/32/18083_2.png) [@Cody\_Walseth](https://forum.digikey.com/u/Cody_Walseth)\
**Post date:** [February 8, 2022, 2:21pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/18 "2022-02-08T14:21:07Z")

</div>

@kier - the COMBINED\_MOSFET symbol has been fixed. Can you verify it is now working as expected in your symbols and project?

The team is looking into on the issue with the HV\_VOLTAGE SENSE symbol.

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 8, 2022, 2:25pm UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/19 "2022-02-08T14:25:29Z")

</div>

@Cody_Walseth Ah, I see. Yes COMBINED\_MOSFET works fine now. Thank you very much!

---

<div class="post-metadata">

**Author:** ![kier](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@kier](https://forum.digikey.com/u/kier)\
**Post date:** [February 17, 2022, 9:24am UTC](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670/20 "2022-02-17T09:24:10Z")

</div>

I have opened problem symbol HV\_VOLTAGE SENSE and Saved As HV\_VOLTAGE\_SENSE (with second underscore) but it the issue remains.

[Next page](https://forum.digikey.com/t/custom-symbol-has-detached-pins-when-placed-in-schematic/19670.md?page=2)
