# Debian: Getting Started with the AM437X\_EVM

**URL:** <https://forum.digikey.com/t/debian-getting-started-with-the-am437x-evm/12456>\
**Category:** Linux Guides\
**Created:** [March 3, 2021, 9:44pm UTC](https://forum.digikey.com/t/debian-getting-started-with-the-am437x-evm/12456 "2021-03-03T21:44:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RobertCNelson](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/robertcnelson/32/12_2.png) [@RobertCNelson](https://forum.digikey.com/u/RobertCNelson)\
**Post date:** [March 3, 2021, 9:44pm UTC](https://forum.digikey.com/t/debian-getting-started-with-the-am437x-evm/12456/1 "2021-03-03T21:44:21Z")

</div>

This is a page about TI’s Cortex-A9 based; AM437X\_EVM.

# Availability

Boards:

- [STARTER KIT AM437X](https://www.digikey.com/en/products/detail/texas-instruments/TMDXSK437X/5764647) at DigiKey
- [KIT IND DEV FOR AM437](https://www.digikey.com/en/products/detail/texas-instruments/TMDSIDK437X/5067076) at DigiKey
- [AM437X EVALUATION BRD](https://www.digikey.com/en/products/detail/texas-instruments/TMDSEVM437X/6110518) at DigiKey

# Basic Requirements

- Running a recent supported release of Debian, Fedora or Ubuntu on a x86 64bit based PC; without OS Virtualization Software.
- Many of the listed commands assume /bin/bash as the default shell.
- ARM Cross Compiler – Linaro: [https://www.linaro.org](https://www.linaro.org)
  - Linaro Toolchain Binaries: [https://www.linaro.org/downloads/](https://www.linaro.org/downloads/)

- Bootloader
  - Das U-Boot – the Universal Boot Loader: [http://www.denx.de/wiki/U-Boot](http://www.denx.de/wiki/U-Boot)
  - Source: [https://github.com/u-boot/u-boot/](https://github.com/u-boot/u-boot/)

- Linux Kernel
  - Linus’s Mainline tree: [https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git](https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git)

- ARM based rootfs
  - Debian: [https://www.debian.org](https://www.debian.org)

# ARM Cross Compiler: GCC

This is a pre-built (64bit) version of GCC that runs on generic linux, sorry (32bit) x86 users, it’s time to upgrade…  
Download/Extract:

```bash
#user@localhost:~$
wget -c https://releases.linaro.org/components/toolchain/binaries/6.5-2018.12/arm-linux-gnueabihf/gcc-linaro-6.5.0-2018.12-x86_64_arm-linux-gnueabihf.tar.xz
tar xf gcc-linaro-6.5.0-2018.12-x86_64_arm-linux-gnueabihf.tar.xz
export CC=`pwd`/gcc-linaro-6.5.0-2018.12-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-

```

Test Cross Compiler:

```bash
#user@localhost:~$
${CC}gcc --version

```

```bash
#Test Output:
arm-linux-gnueabihf-gcc (Linaro GCC 6.5-2018.12) 6.5.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

```

# Bootloader: U-Boot

Das U-Boot – the Universal Boot Loader: [http://www.denx.de/wiki/U-Boot](http://www.denx.de/wiki/U-Boot)  
Depending on your Linux Distrubution, you will also need a host gcc and other tools, so with Debian/Ubuntu start with installing the build-essential meta package.  
[eewiki.net](http://eewiki.net) patch archive: [https://github.com/eewiki/u-boot-patches](https://github.com/eewiki/u-boot-patches)  
Download:

```bash
#user@localhost:~$
git clone -b v2018.01 https://github.com/u-boot/u-boot --depth=1
cd u-boot/

```

Patches:

```bash
#user@localhost:~/u-boot$
wget -c https://github.com/eewiki/u-boot-patches/raw/master/v2018.01/0001-am43xx_evm-fixes.patch
 
patch -p1 < 0001-am43xx_evm-fixes.patch

```

Configure and Build:

```bash
#user@localhost:~/u-boot$
make ARCH=arm CROSS_COMPILE=${CC} distclean
make ARCH=arm CROSS_COMPILE=${CC} am43xx_evm_defconfig
make ARCH=arm CROSS_COMPILE=${CC}

```

# Linux Kernel

This script will build the kernel, modules, device tree binaries and copy them to the deploy directory.

### TI BSP

Download:

```bash
#~/
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev ./kernelbuildscripts
cd kernelbuildscripts/

```

For TI v4.19.x:

```bash
#~/kernelbuildscripts/
git checkout origin/ti-linux-4.19.y -b tmp

```

For TI v4.19.x: Real-Time

```bash
#~/kernelbuildscripts/
git checkout origin/ti-linux-rt-4.19.y -b tmp

```

For TI v5.4.x:

```bash
#~/kernelbuildscripts/
git checkout origin/ti-linux-5.4.y -b tmp

```

For TI v5.4.x: Real-Time

```bash
#~/kernelbuildscripts/
git checkout origin/ti-linux-rt-5.4.y -b tmp

```

For TI v5.10.x:

```bash
#~/kernelbuildscripts/
git checkout origin/ti-linux-5.10.y -b tmp

```

For TI v5.10.x: Real-Time

```bash
#~/kernelbuildscripts/
git checkout origin/ti-linux-rt-5.10.y -b tmp

```

Build:

```bash
#user@localhost:~/kernelbuildscripts$
./build_kernel.sh

```

# Root File System

### Debian 11

| User | Password |
| --- | --- |
| debian | temppwd |
| root | root |

Download:

```bash
#user@localhost:~$
wget -c https://rcn-ee.com/rootfs/eewiki/minfs/debian-11.3-minimal-armhf-2022-04-15.tar.xz

```

Verify:

```bash
#user@localhost:~$
sha256sum debian-11.3-minimal-armhf-2022-04-15.tar.xz

```

```bash
#sha256sum output:
575738843651de2962f251447f4742d4f33313d6f7f5edf282a401207f5e6646 debian-11.3-minimal-armhf-2022-04-15.tar.xz

```

Extract:

```bash
#user@localhost:~$
tar xf debian-11.3-minimal-armhf-2022-04-15.tar.xz

```

# Setup microSD card

We need to access the External Drive to be utilized by the target device. Run lsblk to help figure out what linux device has been reserved for your External Drive.

```bash
#Example: for DISK=/dev/sdX
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 512M 0 part /boot/efi
└─sda2 8:2 0 465.3G 0 part / <- Development Machine Root Partition
sdb 8:16 1 962M 0 disk <- microSD/USB Storage Device
└─sdb1 8:17 1 961M 0 part <- microSD/USB Storage Partition

```

```bash
#Thus you would use:
export DISK=/dev/sdb

```

```bash
#Example: for DISK=/dev/mmcblkX
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 512M 0 part /boot/efi
└─sda2 8:2 0 465.3G 0 part / <- Development Machine Root Partition
mmcblk0 179:0 0 962M 0 disk <- microSD/USB Storage Device
└─mmcblk0p1 179:1 0 961M 0 part <- microSD/USB Storage Partition

```

```bash
#Thus you would use:
export DISK=/dev/mmcblk0

```

Erase partition table/labels on microSD card:

```bash
sudo dd if=/dev/zero of=${DISK} bs=1M count=20

```

Create Partition Layout:  
With util-linux v2.26, sfdisk was rewritten and is now based on libfdisk.

```bash
#Check the version of sfdisk installed on your pc is atleast 2.26.x or newer.
sudo sfdisk --version

```

```bash
#Example Output
sfdisk from util-linux 2.27.1

```

```bash
#sfdisk >= 2.26.x
sudo sfdisk ${DISK} <<- __EOF__
1M,12M,0xE,*
13M,,,-
__EOF__

```

Format Partition:

```auto
for: DISK=/dev/mmcblkX
sudo mkfs.vfat -F 16 -n BOOT ${DISK}p1
sudo mkfs.ext4 -L rootfs ${DISK}p2
 
for: DISK=/dev/sdX
sudo mkfs.vfat -F 16 -n BOOT ${DISK}1
sudo mkfs.ext4 -L rootfs ${DISK}2

```

Mount Partition:  
**On most systems these partitions may be auto-mounted…**

```bash
sudo mkdir -p /media/boot/
sudo mkdir -p /media/rootfs/
 
for: DISK=/dev/mmcblkX
sudo mount ${DISK}p1 /media/boot/
sudo mount ${DISK}p2 /media/rootfs/
 
for: DISK=/dev/sdX
sudo mount ${DISK}1 /media/boot/
sudo mount ${DISK}2 /media/rootfs/

```

# Install Bootloader

Copy MLO/u-boot.img to the boot partition  
Download:

```bash
#~/
sudo cp -v ./u-boot/MLO /media/boot/
sudo cp -v ./u-boot/u-boot.img /media/boot/

```

# Install Kernel and Root File System

To help new users, since the kernel version can change on a daily basis. The kernel building scripts listed on this page will now give you a hint of what kernel version was built.

```bash
-----------------------------
Script Complete
eewiki.net: [user@localhost:~$ export kernel_version=5.X.Y-Z]
-----------------------------

```

Copy and paste that “export kernel\_version=5.X.Y-Z” exactly as shown in your own build/desktop environment and hit enter to create an environment variable to be used later.

```bash
export kernel_version=5.X.Y-Z

```

### Copy Root File System

```bash
#Debian; Root File System: user@localhost:~$
sudo tar xfvp ./debian-*-*-armhf-*/armhf-rootfs-*.tar -C /media/rootfs/
sync

```

### Set uname\_r in /boot/uEnv.txt

```bash
#user@localhost:~$
sudo sh -c "echo 'uname_r=${kernel_version}' >> /media/rootfs/boot/uEnv.txt"

```

### Copy Kernel Image

Kernel Image:

```bash
#user@localhost:~$
sudo cp -v ./kernelbuildscripts/deploy/${kernel_version}.zImage /media/rootfs/boot/vmlinuz-${kernel_version}

```

### Copy Kernel Device Tree Binaries

```bash
#user@localhost:~$
sudo mkdir -p /media/rootfs/boot/dtbs/${kernel_version}/
sudo tar xfv ./kernelbuildscripts/deploy/${kernel_version}-dtbs.tar.gz -C /media/rootfs/boot/dtbs/${kernel_version}/

```

### Copy Kernel Modules

```bash
#user@localhost:~$
sudo tar xfv ./kernelbuildscripts/deploy/${kernel_version}-modules.tar.gz -C /media/rootfs/

```

### File Systems Table (/etc/fstab)

```bash
#user@localhost:~/$
sudo sh -c "echo '/dev/mmcblk0p2 / auto errors=remount-ro 0 1' >> /media/rootfs/etc/fstab"
sudo sh -c "echo '/dev/mmcblk0p1 /boot/uboot auto defaults 0 2' >> /media/rootfs/etc/fstab"

```

### Remove microSD/SD card

```bash
sync
sudo umount /media/boot
sudo umount /media/rootfs

```

# Comments

Any questions or comments please go to our TechForum: [TechForum](https://forum.digikey.com/c/support/linux-discussions/5)
