# DELTA DTB Controller, Latching Alarm relays?

**URL:** <https://forum.digikey.com/t/delta-dtb-controller-latching-alarm-relays/47770>\
**Category:** Industrial Automation and Control\
**Tags:** controllers, delta-electronics-industrial-automation, documentation\
**Created:** [January 7, 2025, 7:11pm UTC](https://forum.digikey.com/t/delta-dtb-controller-latching-alarm-relays/47770 "2025-01-07T19:11:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![smonetus](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/smonetus/32/53040_2.png) [@smonetus](https://forum.digikey.com/u/smonetus)\
**Post date:** [January 7, 2025, 7:11pm UTC](https://forum.digikey.com/t/delta-dtb-controller-latching-alarm-relays/47770/1 "2025-01-07T19:11:17Z")

</div>

Hello,  
I am using a DTB4848VR controller and I am wondering if the high alarm relay, once tripped, will stay latched even if the sensed temperature drops back down into it’s NORMAL range ?  
I can find no mention of this in the Instruction Sheet.  
Is there a more technical manual available for this controller?  
Thanks,  
Steve

---

<div class="post-metadata">

**Author:** ![Kristof\_2649](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/kristof_2649/32/2325_2.png) [@Kristof\_2649](https://forum.digikey.com/u/Kristof_2649)\
**Post date:** [January 7, 2025, 7:32pm UTC](https://forum.digikey.com/t/delta-dtb-controller-latching-alarm-relays/47770/2 "2025-01-07T19:32:39Z")

</div>

Page 6 and 7 of the instruction sheet list the different types of Alarm Output Operation.

I don’t see that any of the options would offer a latching alarm.

 ![image](https://global.discourse-cdn.com/digikey/original/3X/0/c/0cc54cc8570095317a0941486deee48d12c3d6aa.png)

 ![image](https://global.discourse-cdn.com/digikey/original/3X/d/9/d9bcd36b3a0f55618944ae9720f330fd372f18ee.png)
