# Delta Solenoid (DSML-1153-24C)

**URL:** <https://forum.digikey.com/t/delta-solenoid-dsml-1153-24c/52976>\
**Category:** Motors, Actuators, Solenoids and Drivers\
**Tags:** delta-electronics, solenoids\
**Created:** [March 24, 2025, 3:58pm UTC](https://forum.digikey.com/t/delta-solenoid-dsml-1153-24c/52976 "2025-03-24T15:58:54Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![rick\_1976](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/rick_1976/32/1571_2.png) [@rick\_1976](https://forum.digikey.com/u/rick_1976)\
**Post date:** [March 24, 2025, 5:53pm UTC](https://forum.digikey.com/t/delta-solenoid-dsml-1153-24c/52976/3 "2025-03-24T17:53:09Z")

</div>

[This post](https://forum.digikey.com/t/operation-of-the-latching-solenoid/44294) may be of interest, as an example discussing use of the part in question.

> [@markwitt3](#):
>
> The scope plot showed the current draw lasted about 50mS then the power went down to about zero.

One would expect to see some transient behavior as the mechanicals are in motion, but after things have settled there should be roughly 300mA flowing with 24V applied. Observation to the contrary would appear to suggest an issue with measurement or the controlling apparatus.

---

_[View the full topic](https://forum.digikey.com/t/delta-solenoid-dsml-1153-24c/52976)._