# HARWIN M50-3301342

**URL:** <https://forum.digikey.com/t/harwin-m50-3301342/58325>\
**Category:** Rectangular Connectors\
**Created:** [August 7, 2025, 8:33pm UTC](https://forum.digikey.com/t/harwin-m50-3301342/58325 "2025-08-07T20:33:16Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![dmolloy](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@dmolloy](https://forum.digikey.com/u/dmolloy)\
**Post date:** [August 7, 2025, 8:33pm UTC](https://forum.digikey.com/t/harwin-m50-3301342/58325/1 "2025-08-07T20:33:16Z")

</div>

Hi, trying to use this connector with 28 awg wire, it won’t fit, do they make a 28 awg version of this, or can anyone recommend a 28 awg connector I can use

---

<div class="post-metadata">

**Author:** ![Troy\_2808](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/troy_2808/32/132_2.png) [@Troy\_2808](https://forum.digikey.com/u/Troy_2808)\
**Post date:** [August 7, 2025, 8:57pm UTC](https://forum.digikey.com/t/harwin-m50-3301342/58325/2 "2025-08-07T20:57:31Z")

</div>

Hello dmolloy,

The connector in question Part Number M50-3301342 is for use with 30AWG wire. For using larger cable like 28AWG larger size pitch would be required such as 2mm instead of 1.27mm Examples:

[Free Hanging, Panel Mount | Rectangular Connectors | Electronic Components Distributor DigiKey](https://www.digikey.com/en/products/filter/rectangular-connectors/free-hanging-panel-mount/316?s=N4IgjCBcoGwJxVAYygMwIYBsDOBTANCAPZQDaIAzACxwBMdIAuoQA4AuUIAymwE4CWAOwDmIAL6EA7AA5EIFJAw4CxMuBgAGAKxUKIQmE06Y%2B9dumTTYKtLBa9zEO048BI8YWmzo8tFjyEJJDkdnAUMFRMrByQ3HxCohLg2pY%2BCkoBqsGUWpIwFJaOzrGuCR7gcNIIaX7KgWoaTEm0YJK0cun%2BKkHk7UUxIAByAK4AtrgCKGLTQA&_gl=1*1jgpr2x*_gcl_au*NTA3MDY4MjEuMTc1NTEyMTkzOA..)

---

<div class="post-metadata">

**Author:** ![David\_1528](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/david_1528/32/47212_2.png) [@David\_1528](https://forum.digikey.com/u/David_1528)\
**Post date:** [August 7, 2025, 9:29pm UTC](https://forum.digikey.com/t/harwin-m50-3301342/58325/3 "2025-08-07T21:29:01Z")

</div>

To add to @Troy_2808’s response, it does not look like anyone we carry makes a 1.27mm pitch IDC type rectangular socket connector which uses 28 AWG ribbon cable.

Just to make sure you’re looking for the right sized connector, are you really looking for a 1.27mm pitch connector? Such a connector requires a ribbon cable with a 0.64mm pitch, not a 1.27mm pitch, and we do not carry a single ribbon cable with 0.64mm pitch in 28 AWG – they are all 30 AWG.

If you actually have a 1.27mm pitch cable, then you would need a connector with a 2.54mm (0.1”) pitch to properly fit, and those commonly could take 28 AWG ribbon cable. [Here’s a link](https://www.digikey.com/short/f48578bw) to those 2.54mm pitch IDC connectors.

---

<div class="post-metadata">

**Author:** ![dmolloy](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@dmolloy](https://forum.digikey.com/u/dmolloy)\
**Post date:** [August 8, 2025, 11:19am UTC](https://forum.digikey.com/t/harwin-m50-3301342/58325/4 "2025-08-08T11:19:17Z")

</div>

Hi

It’s 28 awg mil spec wire we are using,

M22759/11-30-0

M22759/11-30-2

M22759/11-30-9

M22759/11-30-5

Originally customer wanted 30awg, we couldn’t get any 30 awg milspec wire. We bought the 28 awg instead, but the 30awg connecter won’t fit ie Harwin p/n M50-3301342, we need to fit a 28awg equivalent.

---

<div class="post-metadata">

**Author:** ![Steve\_Fellman](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Steve\_Fellman](https://forum.digikey.com/u/Steve_Fellman)\
**Post date:** [August 8, 2025, 1:11pm UTC](https://forum.digikey.com/t/harwin-m50-3301342/58325/5 "2025-08-08T13:11:02Z")

</div>

Hello,

We don’t have any equivalent connectors to M50-3301342 that use 28awg and the wires you listed are single conductor hook-up wire, not ribbon cable. Can you use a connector with a larger pitch like one of these that can use 28awg ?

---

<div class="post-metadata">

**Author:** ![David\_1528](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/david_1528/32/47212_2.png) [@David\_1528](https://forum.digikey.com/u/David_1528)\
**Post date:** [August 8, 2025, 3:45pm UTC](https://forum.digikey.com/t/harwin-m50-3301342/58325/6 "2025-08-08T15:45:39Z")

</div>

Correct me if I’m wrong, but doesn’t the “-30” portion of the cable part number specifically mean 30 AWG wire size?

Regardless, as @Steve_Fellman mentioned, it does seem that M22759/11 also implies a single conductor rather than a ribbon cable. The Harwin M50-3301342 is intended for ribbon cable rather than single conductors, though very careful alignment before IDC compression _may_ be possible, but I wouldn’t recommend it.

So something seems funny here.

- What is the specification or set of requirements for your cable-connector assembly?
- Does it specify using the M50-3301342 connector, specifically, or does it specify just using 26 conductor connector with 28AWG M22759/11 wires?
- What connector is this cable assembly supposed to mate with? Obviously those connectors must be mate-able.
