# Help with choosing the correct hardware for harness

**URL:** <https://forum.digikey.com/t/help-with-choosing-the-correct-hardware-for-harness/47995>\
**Category:** Rectangular Connectors\
**Tags:** jst-sales-america-inc, cross-reference, rectangular-connector-housings, part-identification\
**Created:** [January 15, 2025, 12:26am UTC](https://forum.digikey.com/t/help-with-choosing-the-correct-hardware-for-harness/47995 "2025-01-15T00:26:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cockadoodledrones](https://avatars.discourse-cdn.com/v4/letter/c/82dd89/32.png) [@cockadoodledrones](https://forum.digikey.com/u/cockadoodledrones)\
**Post date:** [January 15, 2025, 12:26am UTC](https://forum.digikey.com/t/help-with-choosing-the-correct-hardware-for-harness/47995/1 "2025-01-15T00:26:50Z")

</div>

Howdy. I’m trying to find the correct part connectors and pins and crimping tools to build the harness my newest drone. The connector that works with the flight controller is DF1B-18DP-2.5DS.  
I need the male connector correct pins for same. This will spider out to 3 modules using a JST-GH-6P, SH1.0-4P and the third I need some help with. The pins are 2.5 with 6 pins, however I only need to engage 4 of them and they’re inline with each other. It would also be helpful for it to be a 90 degree connector for the sake of cleanliness. The other connector is a 3 pin for the 18 awg motor wires.  
Also the correct crimper and wire cutter to handle the silicone wires.  
Thank you

---

<div class="post-metadata">

**Author:** ![Rob\_Johnson](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@Rob\_Johnson](https://forum.digikey.com/u/Rob_Johnson)\
**Post date:** [January 15, 2025, 12:53am UTC](https://forum.digikey.com/t/help-with-choosing-the-correct-hardware-for-harness/47995/2 "2025-01-15T00:53:43Z")

</div>

Hello, welcome to the TechForum!

For connector [DF1B-18DP-2.5DS](https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/DF1B-18DP-2-5DS/558263), I was able to find [H3817-ND](https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/DF1B-18DS-2-5RC/558528) in our system as the housing, [H3828-ND](https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/DF1B-2022SC/558539) as an option for the contacts, and [H9936-ND](https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/DF1B-TA2022SHC/558606) as the crimp tool for these. For JST-GH-6P I was able to find [455-1596-ND](https://www.digikey.com/en/products/detail/jst-sales-america-inc/GHR-06V-S/807818), [455-1606-1-ND](https://www.digikey.com/en/products/detail/jst-sales-america-inc/SSHL-002T-P0-2/807828), and [455-2883-ND](https://www.digikey.com/en/products/detail/jst-sales-america-inc/YRS-1590/5052067) as the housing, contacts, and crimp tool. Unfortunately the largest wire gauge I could find for your first connector is 20AWG, and the second connector is 26AWG. I was unable to find options for 18AWG

---

<div class="post-metadata">

**Author:** ![cockadoodledrones](https://avatars.discourse-cdn.com/v4/letter/c/82dd89/32.png) [@cockadoodledrones](https://forum.digikey.com/u/cockadoodledrones)\
**Post date:** [January 15, 2025, 1:24am UTC](https://forum.digikey.com/t/help-with-choosing-the-correct-hardware-for-harness/47995/3 "2025-01-15T01:24:13Z")

</div>

Thank you so far Mr Johnson. Will the JRready crimping tool also work? I’ve used them before and they’re in a satisfactory price range. It doesn’t have to be a rectangle connector. I’m just trying to do as little soldering as possible.
