# Home Automation with ESP32

**URL:** <https://forum.digikey.com/t/home-automation-with-esp32/22736>\
**Category:** Design Tools and Resources\
**Created:** [June 2, 2022, 1:00am UTC](https://forum.digikey.com/t/home-automation-with-esp32/22736 "2022-06-02T01:00:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![andrea05256](https://avatars.discourse-cdn.com/v4/letter/a/59ef9b/32.png) [@andrea05256](https://forum.digikey.com/u/andrea05256)\
**Post date:** [June 2, 2022, 1:00am UTC](https://forum.digikey.com/t/home-automation-with-esp32/22736/1 "2022-06-02T01:00:34Z")

</div>

Hi,

I am working on my home project, where I want to control all my appliances with WiFi. I want to create small nodes i.e. separate node for main switches, then a node for washroom switches, then there may be a third switch to control, or a window curtain control node, so I want to create independent multiple nodes, all will be communicating with each other.

I have searched online and found the similar idea here: [Motorized WiFi Roller Blind - ESP8266 - Share Project - PCBWay](https://www.pcbway.com/project/shareproject/Motorized_WiFi_Roller_Blind_ESP8266_ffa727fa.html) I am exactly trying to create such nodes, about the mechanical part or casing that’s not yet to be finalized.

Rite now I am focusing on the electronics side, so can someone please guide me a little. I have worked on ESP32 but as much as I have understood it, I need to create ESP32 mesh networks where multiple nodes talking to parent node. So, any suggestions would be welcome. How I should proceed it??

Thanks.

---

<div class="post-metadata">

**Author:** ![udanis](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/udanis/32/26885_2.png) [@udanis](https://forum.digikey.com/u/udanis)\
**Post date:** [June 2, 2022, 11:32am UTC](https://forum.digikey.com/t/home-automation-with-esp32/22736/2 "2022-06-02T11:32:15Z")

</div>

Hello,

For ESP32 node-to-node communication take a look at “ESP-NOW”. I have only tinkered with it a little but it was fairly straightforward. It sounds exactly what you are looking for.

Hope this helps!  
Alex Udanis

---

<div class="post-metadata">

**Author:** ![kellygreene0805](https://avatars.discourse-cdn.com/v4/letter/k/ee59a6/32.png) [@kellygreene0805](https://forum.digikey.com/u/kellygreene0805)\
**Post date:** [August 7, 2022, 4:41am UTC](https://forum.digikey.com/t/home-automation-with-esp32/22736/3 "2022-08-07T04:41:54Z")

</div>

For creating the mesh network, it’s a pretty straightforward process. You can do a search online and there are tons of resources you’ll find helpful.

---

<div class="post-metadata">

**Author:** ![Keonte45](https://avatars.discourse-cdn.com/v4/letter/k/9e8a1a/32.png) [@Keonte45](https://forum.digikey.com/u/Keonte45)\
**Post date:** [September 7, 2022, 11:11pm UTC](https://forum.digikey.com/t/home-automation-with-esp32/22736/5 "2022-09-07T23:11:55Z")

</div>

You can check out this [site](https://www.theengineeringprojects.com/2016/08/home-automation-project-using-xbee-arduino.html) for assistance with ESP32 home automation.
