# INSULATION TUBE

**URL:** <https://forum.digikey.com/t/insulation-tube/69417>\
**Category:** Interconnect\
**Tags:** protective-hoses-solid-tubing-sleeving, cross-reference, cables-wires-management, part-identification\
**Created:** [June 3, 2026, 6:59pm UTC](https://forum.digikey.com/t/insulation-tube/69417 "2026-06-03T18:59:33Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![rjimenez](https://avatars.discourse-cdn.com/v4/letter/r/cc9497/32.png) [@rjimenez](https://forum.digikey.com/u/rjimenez)\
**Post date:** [June 3, 2026, 6:59pm UTC](https://forum.digikey.com/t/insulation-tube/69417/1 "2026-06-03T18:59:33Z")

</div>

Can you provide a part number by Alpha Wire for a Insulation tube 1,5 kV 22x0,7mm 155°C

---

<div class="post-metadata">

**Author:** ![Karl\_1696](https://avatars.discourse-cdn.com/v4/letter/k/9de0a6/32.png) [@Karl\_1696](https://forum.digikey.com/u/Karl_1696)\
**Post date:** [June 3, 2026, 7:20pm UTC](https://forum.digikey.com/t/insulation-tube/69417/2 "2026-06-03T19:20:23Z")

</div>

Hello rjimenez, welcome to the TechForum,

Unfortunately I could not find anything that we carry.

Do you have a series in mind, or any other information?

---

<div class="post-metadata">

**Author:** ![rjimenez](https://avatars.discourse-cdn.com/v4/letter/r/cc9497/32.png) [@rjimenez](https://forum.digikey.com/u/rjimenez)\
**Post date:** [June 3, 2026, 7:37pm UTC](https://forum.digikey.com/t/insulation-tube/69417/3 "2026-06-03T19:37:26Z")

</div>

Hi Karl,

Thanks for your reply.

I have attached datasheet, it seems to be a polyester fiber impregnated with acrylic resin.

In my BOM I just have this features: Insulation tube 155ºC 5,0x0,7mm.  
Can you check attached information and let me know if you have the same or something similar?

Thanks in advanced.

Best regards.

---

<div class="post-metadata">

**Author:** ![Karl\_1696](https://avatars.discourse-cdn.com/v4/letter/k/9de0a6/32.png) [@Karl\_1696](https://forum.digikey.com/u/Karl_1696)\
**Post date:** [June 3, 2026, 7:49pm UTC](https://forum.digikey.com/t/insulation-tube/69417/4 "2026-06-03T19:49:40Z")

</div>

Sorry, we do not carry anything like this.

---

<div class="post-metadata">

**Author:** ![rick\_1976](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/rick_1976/32/1571_2.png) [@rick\_1976](https://forum.digikey.com/u/rick_1976)\
**Post date:** [June 3, 2026, 7:56pm UTC](https://forum.digikey.com/t/insulation-tube/69417/5 "2026-06-03T19:56:55Z")

</div>

There’s some listings [here](https://www.digikey.com/short/jjwdjjz9) for dielectric-rated protective tube/sleeve materials with an ID in the 5mm range. Not a direct equivalent in most cases, but probably an upgrade in terms of product specification.

---

<div class="post-metadata">

**Author:** ![rjimenez](https://avatars.discourse-cdn.com/v4/letter/r/cc9497/32.png) [@rjimenez](https://forum.digikey.com/u/rjimenez)\
**Post date:** [June 3, 2026, 8:06pm UTC](https://forum.digikey.com/t/insulation-tube/69417/6 "2026-06-03T20:06:58Z")

</div>

Ok, I’ll check them and I hope to find something for my project, thanks for your support.

Best regards.

---

<div class="post-metadata">

**Author:** ![Liza](https://avatars.discourse-cdn.com/v4/letter/l/a88e4f/32.png) [@Liza](https://forum.digikey.com/u/Liza)\
**Post date:** [June 5, 2026, 6:50am UTC](https://forum.digikey.com/t/insulation-tube/69417/7 "2026-06-05T06:50:55Z")

</div>

I’d also check the temperature rating of the tubing if it’s going near components that can get warm. Heat-shrink tubing can be a nice option too when you need both insulation and a snug fit around the wire.
