# Line 6 Volume Pot **URL:** \ **Category:** Support\ **Created:** [August 11, 2023, 6:30pm UTC](https://forum.digikey.com/t/line-6-volume-pot/34084 "2023-08-11T18:30:00Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![phrygian](https://avatars.discourse-cdn.com/v4/letter/p/e8c25b/32.png) [@phrygian](https://forum.digikey.com/u/phrygian)\ **Post date:** [August 11, 2023, 6:30pm UTC](https://forum.digikey.com/t/line-6-volume-pot/34084/1 "2023-08-11T18:30:00Z")
Looking for a Master Volume Controller/Pot for a Line 6 Flextone III Amp - original part # 01-48-4103. no longer manufactured. ---
**Author:** ![David\_1768](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/david_1768/32/9762_2.png) [@David\_1768](https://forum.digikey.com/u/David_1768)\ **Post date:** [August 11, 2023, 6:51pm UTC](https://forum.digikey.com/t/line-6-volume-pot/34084/2 "2023-08-11T18:51:35Z")
Welcome to the DigiKey TechForum phrygian. We carry a lot of potentiometers, but we do not carry the part number 01-48-4103. We would need a full description on the part, and pictures would help. Then we can search for a possible alternate that may work for you. ---
**Author:** ![phrygian](https://avatars.discourse-cdn.com/v4/letter/p/e8c25b/32.png) [@phrygian](https://forum.digikey.com/u/phrygian)\ **Post date:** [August 11, 2023, 7:01pm UTC](https://forum.digikey.com/t/line-6-volume-pot/34084/3 "2023-08-11T19:01:45Z")
Hi, David. thank you for the very prompt reply. It’s not actually a pot, its a “digital voltage controller”. 🙄 🤣 It works on gradient voltages levels, not on an analog audio signal. If you think you can source something, I’ll take it out of the amp to take a look, but I’m waiting on getting one before i venture in that direction. The controller is electrically noisy/scratchy, and getting to be a constant annoyance. In the old days, you could just spray the pot to clean up the carbon, but you can’t do that with this puppy. Martin ---
**Author:** ![Ryan\_2724](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/ryan_2724/32/1716_2.png) [@Ryan\_2724](https://forum.digikey.com/u/Ryan_2724)\ **Post date:** [August 11, 2023, 7:37pm UTC](https://forum.digikey.com/t/line-6-volume-pot/34084/4 "2023-08-11T19:37:39Z")
Hi @phrygian , I think the Line 6 Duoverb references 01-48-4103 part to be ‘pot, stereo, 10kb, linear taper, 25mm’. If they are referencing the same part number used in that amp, you may want to sort through [these options](https://www.digikey.com/en/products/filter/rotary-potentiometers-rheostats/84?s=N4IgjCBcodIMZQGYEMA2BnApgGhAeygG0QB2AZgBYAGckAXTwAcAXKEAZRYCcBLAOwDmIAL54ArJUpRQiSKky4CxEOVIA2KSDzkAHACZSATm0gax9Q2ZtInHgOFiQuo5bhyF2PIUgk9tLUYQVnYuPiFRPDBqAxkEZHQvZV9wcSpLKPFdcjoo9VpqUwggkNswh0jwaiN9OI9EpR8-dXEwMGkSmztwxyjdShN3BMVvFVqoq2CugEl%2BFixBLG5KgFpaocgeAFdGlXEGJxXB2Sht3ZTikSugA) to see if one of them would work. Otherwise, it may be some kind of [Encoder](https://www.digikey.com/en/products/filter/encoders/507?s=N4IgjCBcoLQExVAYygFwE4FcCmAaEA9lANogCsIAugL61A). Generally speaking encoders work or don’t work moreso than to be ‘noisy’. Unfortunately, we don’t have access to a Line 6 database to let us know the exact part or specifications that would work. Regards, ---
**Author:** ![phrygian](https://avatars.discourse-cdn.com/v4/letter/p/e8c25b/32.png) [@phrygian](https://forum.digikey.com/u/phrygian)\ **Post date:** [August 11, 2023, 8:27pm UTC](https://forum.digikey.com/t/line-6-volume-pot/34084/5 "2023-08-11T20:27:41Z")
> [@Ryan\_2724](#): > > Line 6 Duoverb Hi, Ryan. thnx as well for the very prompt reply. had someone respond from a discontinued Line 6 repair center in the UK earlier this morning, and he said that this is a digital volume controller, and not replaceable with a standard pot, but looking at the Line 6 troubleshooting F/Q page, just now, it mentions that you can replace the pot with a regular audio pot, with a small amount of output degradation, but it also goes on to mention that the amp users prefer this over the digital pot, as it provides a smoother and more controlled volume change, so there’s hope. right now I’m going to do a factory reset and clean the contacts on the CAT5 FVB Shortboard (what they recommend), and if that doesn’t work, then someone else recommended that re-soldering the connections and re-flowing the boards (I have an air flow gun,and I’ve re-flown a variety boards before, and this works on a lot of shit), so we shall see. (: Thanks again for everyone’s help. I will update the post as i progress along. CIAO _(Please ignore any mistakes made by my spell chicken)_