# MS25042-16D & MS25043-16D Models

**URL:** <https://forum.digikey.com/t/ms25042-16d-ms25043-16d-models/17690>\
**Category:** Design Tools and Resources\
**Created:** [November 4, 2021, 6:42pm UTC](https://forum.digikey.com/t/ms25042-16d-ms25043-16d-models/17690 "2021-11-04T18:42:14Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Anthony](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@Anthony](https://forum.digikey.com/u/Anthony)\
**Post date:** [November 4, 2021, 6:42pm UTC](https://forum.digikey.com/t/ms25042-16d-ms25043-16d-models/17690/1 "2021-11-04T18:42:14Z")

</div>

Do you have CAD models for MS25042-16D & MS25043-16D connector caps. Our system has a preference for STEP if possible.  
Thank you  
-Anthony

---

<div class="post-metadata">

**Author:** ![Nate\_McDowell](https://avatars.discourse-cdn.com/v4/letter/n/7cd45c/32.png) [@Nate\_McDowell](https://forum.digikey.com/u/Nate_McDowell)\
**Post date:** [November 4, 2021, 8:18pm UTC](https://forum.digikey.com/t/ms25042-16d-ms25043-16d-models/17690/2 "2021-11-04T20:18:28Z")

</div>

Hello Anthony,

I wasn’t able to locate this information on any of the manufacturer’s websites, but I have contacted a product specialist for further assistance. I will post again when I have more information for you.

---

<div class="post-metadata">

**Author:** ![Anthony](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@Anthony](https://forum.digikey.com/u/Anthony)\
**Post date:** [November 4, 2021, 8:46pm UTC](https://forum.digikey.com/t/ms25042-16d-ms25043-16d-models/17690/3 "2021-11-04T20:46:16Z")

</div>

Thank you very much.

---

<div class="post-metadata">

**Author:** ![Nate\_McDowell](https://avatars.discourse-cdn.com/v4/letter/n/7cd45c/32.png) [@Nate\_McDowell](https://forum.digikey.com/u/Nate_McDowell)\
**Post date:** [November 5, 2021, 7:56pm UTC](https://forum.digikey.com/t/ms25042-16d-ms25043-16d-models/17690/4 "2021-11-05T19:56:16Z")

</div>

Hello Anthony,

Unfortunately we do not have any 3D models, but we were able to receive some 2D sales drawings, would that be of any assistance?

---

<div class="post-metadata">

**Author:** ![Anthony](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@Anthony](https://forum.digikey.com/u/Anthony)\
**Post date:** [November 5, 2021, 9:14pm UTC](https://forum.digikey.com/t/ms25042-16d-ms25043-16d-models/17690/5 "2021-11-05T21:14:57Z")

</div>

Thank you very much for trying Nate but I will try reaching out to a Glenair rep’.

-Anthony