# MSM-226M Magnet Detail

**URL:** <https://forum.digikey.com/t/msm-226m-magnet-detail/72762>\
**Category:** Sensors Transducers\
**Tags:** magnets, pic-gmbh\
**Created:** [October 19, 2026, 9:44pm UTC](https://forum.digikey.com/t/msm-226m-magnet-detail/72762 "2026-10-19T21:44:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![fbfcable](https://avatars.discourse-cdn.com/v4/letter/f/6f9a4e/32.png) [@fbfcable](https://forum.digikey.com/u/fbfcable)\
**Post date:** [October 19, 2026, 9:44pm UTC](https://forum.digikey.com/t/msm-226m-magnet-detail/72762/1 "2026-10-19T21:44:13Z")

</div>

I am looking at the technical details for this [magnet](https://www.digikey.com/en/products/detail/pic-gmbh/MSM-226M/9687327) and cannot determine if the magnet end is electrically connected to the screw and nuts portion of this assembly or is the magnet electrically isolated from the body through the epoxy potting material?

I need to know before I order…

---

<div class="post-metadata">

**Author:** ![rick\_1976](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/rick_1976/32/1571_2.png) [@rick\_1976](https://forum.digikey.com/u/rick_1976)\
**Post date:** [October 19, 2026, 10:50pm UTC](https://forum.digikey.com/t/msm-226m-magnet-detail/72762/2 "2026-10-19T22:50:52Z")

</div>

Greetings,

When the published documentation does not speak to such a point, the implication is that it is not controlled for and cannot be relied upon one way or another.