# Part identify

**URL:** <https://forum.digikey.com/t/part-identify/12330>\
**Category:** Rectangular Connectors\
**Tags:** rectangular-connectors, interconnect, part-identification, connectors-interconnects\
**Created:** [February 25, 2021, 9:40pm UTC](https://forum.digikey.com/t/part-identify/12330 "2021-02-25T21:40:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![bconnoll113](https://avatars.discourse-cdn.com/v4/letter/b/fbc32d/32.png) [@bconnoll113](https://forum.digikey.com/u/bconnoll113)\
**Post date:** [February 25, 2021, 9:40pm UTC](https://forum.digikey.com/t/part-identify/12330/1 "2021-02-25T21:40:19Z")

</div>

![connector](https://global.discourse-cdn.com/digikey/original/2X/8/844b1c06215de1f5ffce2a4b4983162a49bfe098.jpeg)

I am having trouble locating this connector on your website, any help would be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![Bill\_Gust](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/bill_gust/32/2334_2.png) [@Bill\_Gust](https://forum.digikey.com/u/Bill_Gust)\
**Post date:** [February 26, 2021, 12:22pm UTC](https://forum.digikey.com/t/part-identify/12330/2 "2021-02-26T12:22:10Z")

</div>

@ [bconnoll113](https://forum.digikey.com/u/bconnoll113)

Hello,

Can you measure the pitch of the connector (distance from the center of one contact to the center of the next)? You can measure this on the board-side pins, too, if that’s easier than measuring the wire-side housing. A two-place decimal in mm will help.

Also, what device are these being used with? Does that have a model number?

---

<div class="post-metadata">

**Author:** ![bconnoll113](https://avatars.discourse-cdn.com/v4/letter/b/fbc32d/32.png) [@bconnoll113](https://forum.digikey.com/u/bconnoll113)\
**Post date:** [February 26, 2021, 2:50pm UTC](https://forum.digikey.com/t/part-identify/12330/3 "2021-02-26T14:50:25Z")

</div>

![connector2](https://global.discourse-cdn.com/digikey/original/2X/8/824c044a6d0869a087e8ccf6dcd45ce8ad6eb217.jpeg)

Hi Bill, the pitch looks to be about 2.1mm, this pcb belongs to an old microscope, I thought this part looked common enough that I could find it on digi-key, thanks for your help.  
 ![connector3](https://global.discourse-cdn.com/digikey/original/2X/d/dff040e243eda0a8279db7274d4f2ffa1644cb43.jpeg)

---

<div class="post-metadata">

**Author:** ![Kaili\_Simpson](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/kaili_simpson/32/4645_2.png) [@Kaili\_Simpson](https://forum.digikey.com/u/Kaili_Simpson)\
**Post date:** [February 26, 2021, 5:01pm UTC](https://forum.digikey.com/t/part-identify/12330/4 "2021-02-26T17:01:43Z")

</div>

Thank you for your response,

This looks like an IDC connector - here’s the closest option I was able to find on our site:

[https://www.digikey.com/short/wrn4zff0](https://www.digikey.com/short/wrn4zff0)

Please verify and compare the dimensions of your part with the drawing for the above part.  
**Drawing:**  
[https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=179694&DocType=Customer+Drawing&DocLang=English](https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=179694&DocType=Customer+Drawing&DocLang=English)

---

<div class="post-metadata">

**Author:** ![bconnoll113](https://avatars.discourse-cdn.com/v4/letter/b/fbc32d/32.png) [@bconnoll113](https://forum.digikey.com/u/bconnoll113)\
**Post date:** [February 26, 2021, 6:52pm UTC](https://forum.digikey.com/t/part-identify/12330/5 "2021-02-26T18:52:07Z")

</div>

Thank you very much!
