# Please help identify part

**URL:** <https://forum.digikey.com/t/please-help-identify-part/39676>\
**Category:** Rectangular Connectors\
**Tags:** board-in-direct-wire-to-board, part-identification\
**Created:** [March 17, 2024, 1:57pm UTC](https://forum.digikey.com/t/please-help-identify-part/39676 "2024-03-17T13:57:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sportslover323](https://avatars.discourse-cdn.com/v4/letter/s/b9e5f3/32.png) [@sportslover323](https://forum.digikey.com/u/sportslover323)\
**Post date:** [March 17, 2024, 1:57pm UTC](https://forum.digikey.com/t/please-help-identify-part/39676/1 "2024-03-17T13:57:46Z")

</div>

I need help identifying the connectors to repair my device. This is all completely new to me, but I am trying to learn.

There is a cable ribbon that is used to connect a circuit board to an LCD screen. I believe I have identified the cable ribbon correctly as 20COND.

The two images are of the connector without the top part that clamps the cable down because that piece broke when I was removing it.

I am completely new to all of this so ANY help would be appreciated. Thank you!

 ![20240317_094255](https://global.discourse-cdn.com/digikey/original/3X/2/6/26528effe4cd03e2cc8f6df3f4b2c30b4bb4cde1.jpeg)  
 ![20240317_094346](https://global.discourse-cdn.com/digikey/original/3X/8/0/809aa0e64072604b61ab9e1452e40ac1786d79f5.jpeg)

---

<div class="post-metadata">

**Author:** ![raelynn.roen](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/raelynn.roen/32/46693_2.png) [@raelynn.roen](https://forum.digikey.com/u/raelynn.roen)\
**Post date:** [March 18, 2024, 1:17pm UTC](https://forum.digikey.com/t/please-help-identify-part/39676/2 "2024-03-18T13:17:39Z")

</div>

Hello, Sportslover.

[Board In, Direct Wire to Board | Rectangular Connectors | Electronic Components Distributor DigiKey](https://www.digikey.com/en/products/filter/board-in-direct-wire-to-board/317?s=N4IgjCBcoGwJxVAYygMwIYBsDOBTANCAPZQDaIALGGABxwDsIAuoQA4AuUIAyuwE4BLAHYBzEAF9CNGohApIGHAWJlwAZnr04MZm06Qe-YWMng4dWfMV5CJSOQAMzUwFoATJaj8ArsrvkAVmdCFx1oOS8%2BX1tVNRBCCmdTD3sQAHcBPlwAAnYibIAjInQ%2BABNnIA) \<\< These are about as close to your part as I can identify without measurements. Are you able to take a pitch measurement of this device? Information on doing so can be found here:

[Pitch of a Connector - Interconnect - Electronic Component and Engineering Solution Forum - TechForum │ DigiKey](https://forum.digikey.com/t/pitch-of-a-connector/172)