# Porting Altera design to MicroSemi (SmartFusion2)

**URL:** <https://forum.digikey.com/t/porting-altera-design-to-microsemi-smartfusion2/1689>\
**Category:** Integrated Circuits (ICs)\
**Tags:** microchip-technology, altera, microsemi-corporation, embedded\
**Created:** [August 13, 2018, 10:47pm UTC](https://forum.digikey.com/t/porting-altera-design-to-microsemi-smartfusion2/1689 "2018-08-13T22:47:10Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Robert\_Fay](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/robert_fay/32/6529_2.png) [@Robert\_Fay](https://forum.digikey.com/u/Robert_Fay)\
**Post date:** [August 14, 2018, 12:49am UTC](https://forum.digikey.com/t/porting-altera-design-to-microsemi-smartfusion2/1689/3 "2018-08-14T00:49:16Z")

</div>

@sdr_luddite Have you looked at the get started guide we have on the eewiki for the Smartfusion 2?

[Getting Started with the Microsemi SmartFusion 2 Maker-Board - Embedded / Development Boards, Kits, Programmers - Electronic Component and Engineering Solution Forum - TechForum │ DigiKey](https://forum.digikey.com/t/getting-started-with-the-microsemi-smartfusion-2-maker-board/13308)

If that doesn’t help let me know and I can get some more information for you.  
-Robert

---

_[View the full topic](https://forum.digikey.com/t/porting-altera-design-to-microsemi-smartfusion2/1689)._
