# Problems with boards. Anyone I can contact?

**URL:** <https://forum.digikey.com/t/problems-with-boards-anyone-i-can-contact/21873>\
**Category:** DKRed and PCB Builder\
**Created:** [April 26, 2022, 7:27pm UTC](https://forum.digikey.com/t/problems-with-boards-anyone-i-can-contact/21873 "2022-04-26T19:27:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![msullivan](https://avatars.discourse-cdn.com/v4/letter/m/c68b51/32.png) [@msullivan](https://forum.digikey.com/u/msullivan)\
**Post date:** [April 26, 2022, 7:27pm UTC](https://forum.digikey.com/t/problems-with-boards-anyone-i-can-contact/21873/1 "2022-04-26T19:27:19Z")

</div>

I had some DK-Red PCBs made and the drills are way out of registration relative to the Gerber files.  
I understand there’s no checking and that the low price has implications, but these are off by a lot, around 0.3mm  
and, even if I have no recourse, I want to know if this is normal so I can have appropriate expectations next time.

---

<div class="post-metadata">

**Author:** ![Linzee\_1029](https://avatars.discourse-cdn.com/v4/letter/l/0ea827/32.png) [@Linzee\_1029](https://forum.digikey.com/u/Linzee_1029)\
**Post date:** [April 26, 2022, 8:15pm UTC](https://forum.digikey.com/t/problems-with-boards-anyone-i-can-contact/21873/2 "2022-04-26T20:15:17Z")

</div>

Hello @msullivan,

I’m sorry to hear the boards didn’t turn out as they should. I am going to send you a private message for more details to help get this one figured out.