# \[RIIM\] Does RIIM use FEC (forward error correction)? If not, why?

**URL:** <https://forum.digikey.com/t/riim-does-riim-use-fec-forward-error-correction-if-not-why/19977>\
**Category:** Wireless and IoT\
**Tags:** radiocrafts, wireless, faqs, design-tools-and-resources, terminology\
**Created:** [February 9, 2022, 4:13pm UTC](https://forum.digikey.com/t/riim-does-riim-use-fec-forward-error-correction-if-not-why/19977 "2022-02-09T16:13:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Radiocrafts](https://avatars.discourse-cdn.com/v4/letter/r/ce7236/32.png) [@Radiocrafts](https://forum.digikey.com/u/Radiocrafts)\
**Post date:** [February 9, 2022, 4:13pm UTC](https://forum.digikey.com/t/riim-does-riim-use-fec-forward-error-correction-if-not-why/19977/1 "2022-02-09T16:13:13Z")

</div>

[RIIM](https://www.digikey.no/en/product-highlight/r/radiocrafts/riim-ip-mesh-network) does not use FEC.

RIIM uses short packets, so if anything happens on the channel, much of the packet will be lost, so a re-transmission is smarter than trying to re-build a packet which we lost most of. FEC is used more when you have long packets because damage is done to a small part of the packet, then re-construction is feasible, and a re-transmission is a waste of time and bandwidth.

 ![RIIM logo (print)](https://global.discourse-cdn.com/digikey/original/3X/3/d/3d15f9167381159af01c53c067839cdbef40d77d.png) ![RC1180-RC232_600dpi_5_3cm](https://global.discourse-cdn.com/digikey/original/3X/4/e/4e5d61b10080625458395cb5ab3fcec853ce902f.gif)
