# Step file for IWR6843ISK mm wave board

**URL:** <https://forum.digikey.com/t/step-file-for-iwr6843isk-mm-wave-board/66385>\
**Category:** Q&A\
**Created:** [March 10, 2026, 10:25am UTC](https://forum.digikey.com/t/step-file-for-iwr6843isk-mm-wave-board/66385 "2026-03-10T10:25:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![aksellytzen](https://avatars.discourse-cdn.com/v4/letter/a/e8c25b/32.png) [@aksellytzen](https://forum.digikey.com/u/aksellytzen)\
**Post date:** [March 10, 2026, 10:25am UTC](https://forum.digikey.com/t/step-file-for-iwr6843isk-mm-wave-board/66385/1 "2026-03-10T10:25:20Z")

</div>

------Question for IWR6843ISK Please Put your question below------

Is it possible to provide me with a .step file for this board?

---

<div class="post-metadata">

**Author:** ![Steven\_14444](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/steven_14444/32/47465_2.png) [@Steven\_14444](https://forum.digikey.com/u/Steven_14444)\
**Post date:** [March 10, 2026, 2:26pm UTC](https://forum.digikey.com/t/step-file-for-iwr6843isk-mm-wave-board/66385/2 "2026-03-10T14:26:18Z")

</div>

Texas Instruments does not have a step file available for the part. In the link below there is a drawing from their design files that can be used for a general place holder.

[xWR6843 EVM Altium Design Files, Fabrication and Assembly Package (Rev. D)](https://www.ti.com/lit/zip/SWRC355)