# STM32mp157c

**URL:** <https://forum.digikey.com/t/stm32mp157c/41698>\
**Category:** Linux Discussions\
**Created:** [May 27, 2024, 1:51pm UTC](https://forum.digikey.com/t/stm32mp157c/41698 "2024-05-27T13:51:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![yass.bouazz.23](https://avatars.discourse-cdn.com/v4/letter/y/ce7236/32.png) [@yass.bouazz.23](https://forum.digikey.com/u/yass.bouazz.23)\
**Post date:** [May 27, 2024, 1:51pm UTC](https://forum.digikey.com/t/stm32mp157c/41698/1 "2024-05-27T13:51:29Z")

</div>

Hello everyone,

I’m new to STM32 and I’ve followed all the steps outlined in the “Getting Started” page on this link: [Debian Getting Started with the Odyssey STM32MP157C](https://forum.digikey.com/t/debian-getting-started-with-the-odyssey-stm32mp157c/12838).

However, after inserting the SD card, I didn’t see any reaction. If anyone could help, I would greatly appreciate it.

Also, I have a question: Can I directly download the image and flash the board using the Etcher application?

Thank you.

---

<div class="post-metadata">

**Author:** ![RobertCNelson](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/robertcnelson/32/12_2.png) [@RobertCNelson](https://forum.digikey.com/u/RobertCNelson)\
**Post date:** [May 30, 2024, 8:11pm UTC](https://forum.digikey.com/t/stm32mp157c/41698/2 "2024-05-30T20:11:06Z")

</div>

Hi @yass.bouazz.23

Do you have usb-serial adapter hooked up to pins 6 (gnd), 8 (tx) and 10 (rx)? So we can see what the bootloader is doing?

![image](https://global.discourse-cdn.com/digikey/original/3X/f/4/f4c6302adc6322d9c7114fab747a59b03921f581.jpeg)

Regards,