# TE 796271-1 inexpensive hand crimping tool

**URL:** <https://forum.digikey.com/t/te-796271-1-inexpensive-hand-crimping-tool/7903>\
**Category:** Tools\
**Tags:** te-connectivity, tools, interconnect, circular-connectors\
**Created:** [August 10, 2020, 6:00pm UTC](https://forum.digikey.com/t/te-796271-1-inexpensive-hand-crimping-tool/7903 "2020-08-10T18:00:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FrankSmith](https://avatars.discourse-cdn.com/v4/letter/f/3da27b/32.png) [@FrankSmith](https://forum.digikey.com/u/FrankSmith)\
**Post date:** [August 10, 2020, 6:00pm UTC](https://forum.digikey.com/t/te-796271-1-inexpensive-hand-crimping-tool/7903/1 "2020-08-10T18:00:45Z")

</div>

I was planning on using the solder on pins but someone much smarter than me says that soldered connections are not good in high vibration environments. Since I only need to crimp 11 connections, I do not want to spent $200 to $1000 dollars for a professional crimping tool. Is there a $50 or less crimping tool that will get the job done? IT would be for these types of connectors.

> **[66361-3 | Digi-Key Electronics](https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/66361-3/297878)**
>
> Order today, ships today. 66361-3 – Pin Contact Gold Crimp 14-18 AWG Stamped from TE Connectivity AMP Connectors. Pricing and Availability on millions of electronic components from Digi-Key Electronics.

---

<div class="post-metadata">

**Author:** ![rick\_1976](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/rick_1976/32/1571_2.png) [@rick\_1976](https://forum.digikey.com/u/rick_1976)\
**Post date:** [August 10, 2020, 6:22pm UTC](https://forum.digikey.com/t/te-796271-1-inexpensive-hand-crimping-tool/7903/2 "2020-08-10T18:22:50Z")

</div>

I like the [WM9999-ND](https://www.digikey.com/products/en?keywords=wm9999) as a general-use tool for F-crimp style contacts like this.

Not factory-spec of course and thus not for production or critical-application use, but capable of delivering serviceable results for a rather wide range of contact sizes given a bit of practice.

---

<div class="post-metadata">

**Author:** ![Rhonda\_1175](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@Rhonda\_1175](https://forum.digikey.com/u/Rhonda_1175)\
**Post date:** [August 10, 2020, 11:34pm UTC](https://forum.digikey.com/t/te-796271-1-inexpensive-hand-crimping-tool/7903/3 "2020-08-10T23:34:13Z")

</div>

You can try the tool Rick has listed below but the manufacture only recommends the 66361-3 for these contacts so as Rick stated, you may need to practice with the WM9999-ND to get the contact to fit into the housing correctly.
