# Terminal Blocks

**URL:** <https://forum.digikey.com/t/terminal-blocks/14000>\
**Category:** Interconnect\
**Tags:** on-shore-technology-incorporated, interconnect, connectors-interconnects\
**Created:** [April 30, 2021, 10:22pm UTC](https://forum.digikey.com/t/terminal-blocks/14000 "2021-04-30T22:22:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SayBestIan](https://avatars.discourse-cdn.com/v4/letter/s/3d9bf3/32.png) [@SayBestIan](https://forum.digikey.com/u/SayBestIan)\
**Post date:** [April 30, 2021, 10:22pm UTC](https://forum.digikey.com/t/terminal-blocks/14000/1 "2021-04-30T22:22:59Z")

</div>

New to electronic engineering!. Trying to calculate what Watt resistor to put into a pyro channel. I’m making a PCB for model rocketry (just for some context of what I’m doing).

If I have a terminal block (OSTTE040104) and I send 12 Volts through it will it be 12 volts that come out the other side that will then go into a resistor and?

12V \> Terminal OUT \> Terminal IN \> (1 Ohm) Resistor\> Mosfet \> Pull Down (470 Ohms)Resistor/Ground

 ![2021.04.30-18.21 (2)](https://global.discourse-cdn.com/digikey/original/3X/1/7/17b1e5fb7b4f8ee6a8e2190aa84f60cafb8e84ab.png)

---

<div class="post-metadata">

**Author:** ![Ryan\_2724](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/ryan_2724/32/1716_2.png) [@Ryan\_2724](https://forum.digikey.com/u/Ryan_2724)\
**Post date:** [May 1, 2021, 2:47am UTC](https://forum.digikey.com/t/terminal-blocks/14000/2 "2021-05-01T02:47:55Z")

</div>

Hello [SayBestIan](https://forum.digikey.com/u/SayBestIan),

Thank you for contacting the TechForum. Power can be derived from a few formulas, do you happen to know the current that will be puling through the circuit?
