# Thermistor Wire Gauge

**URL:** <https://forum.digikey.com/t/thermistor-wire-gauge/61206>\
**Category:** Q&A\
**Created:** [October 10, 2025, 4:35pm UTC](https://forum.digikey.com/t/thermistor-wire-gauge/61206 "2025-10-10T16:35:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![alright](https://avatars.discourse-cdn.com/v4/letter/a/e47774/32.png) [@alright](https://forum.digikey.com/u/alright)\
**Post date:** [October 10, 2025, 4:35pm UTC](https://forum.digikey.com/t/thermistor-wire-gauge/61206/1 "2025-10-10T16:35:55Z")

</div>

------Question for [CWF1B103G3380](https://www.digikey.com/en/products/detail/cantherm/CWF1B103G3380/1191087) Please Put your question below------  
What wire gauge is used with this thermistor? The datasheet says its available in AWG 24#, 26#, 28#,30# but doesn’t say which this one is.

---

<div class="post-metadata">

**Author:** ![Brent\_2328](https://avatars.discourse-cdn.com/v4/letter/b/839c29/32.png) [@Brent\_2328](https://forum.digikey.com/u/Brent_2328)\
**Post date:** [October 10, 2025, 4:45pm UTC](https://forum.digikey.com/t/thermistor-wire-gauge/61206/2 "2025-10-10T16:45:41Z")

</div>

> [@alright](#):
>
> CWF1B103G3380

Hello @alright,

Thank you for your post.

According to this drawing it appears that the standard issue for the CWF1 series is 26awg.

> **[CWF1\_Series\_Dwg.pdf](https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/2183/CWF1_Series_Dwg.pdf)**
>
> 80.38 KB

---

<div class="post-metadata">

**Author:** ![alright](https://avatars.discourse-cdn.com/v4/letter/a/e47774/32.png) [@alright](https://forum.digikey.com/u/alright)\
**Post date:** [October 10, 2025, 5:00pm UTC](https://forum.digikey.com/t/thermistor-wire-gauge/61206/3 "2025-10-10T17:00:17Z")

</div>

Thank you much appreciated!
