# Tooling

**URL:** <https://forum.digikey.com/t/tooling/40892>\
**Category:** Q&A\
**Created:** [May 2, 2024, 2:53pm UTC](https://forum.digikey.com/t/tooling/40892 "2024-05-02T14:53:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jtaylor](https://avatars.discourse-cdn.com/v4/letter/j/e79b87/32.png) [@jtaylor](https://forum.digikey.com/u/jtaylor)\
**Post date:** [May 2, 2024, 2:53pm UTC](https://forum.digikey.com/t/tooling/40892/1 "2024-05-02T14:53:45Z")

</div>

------Question for 61844-1 Please Put your question below------

Looking for proper tooling for ring terminal. p/n 61844-1  
 ![image](https://global.discourse-cdn.com/digikey/original/3X/f/a/fa45e7d8e05bf7f64d777c91014f7f30ada38a79.png)

---

<div class="post-metadata">

**Author:** ![Rhonda\_1175](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@Rhonda\_1175](https://forum.digikey.com/u/Rhonda_1175)\
**Post date:** [May 2, 2024, 3:26pm UTC](https://forum.digikey.com/t/tooling/40892/2 "2024-05-02T15:26:55Z")

</div>

The manufacturer only lists two crimp tools that are not stocked.  
[61844-1 mfg link](https://www.te.com/en/product-61844-1.html?q=61844-1&source=header)  
However, any 12-10 AWG crimp tool will work for this part.  
[tooling options](https://www.digikey.com/en/products/filter/crimpers-applicators-presses/228?s=N4IgjCBcoJwMwWiAxlAZgQwDYGcCmANCAPZQDaIAbDDAEwCsIR1dAHE1TbTBy3AAy8aCITHqDmNeu0kxqo1rQ4B2fmBgQiq2gBYZIHQ1rK4K-sYkhVAnWbi1TW-nDi2n9WpcrdKrWwF0iAAcAFygQAGUQgCcASwA7AHMQAF8iAFolJFRIGIBXQhJyEEZ-NJB0nmyofMLSSAoIMvKsimQ4gFsggAIQ4mIsEECSqFAgqDBg8cgwfn4UlKA)