# 模組化纜線引腳排列樣式：反向或標準

**URL:** <https://forum.digikey.com/t/topic/36641>\
**Category:** 產品技術提示\
**Tags:** assmann-wsw-components\
**Created:** [November 14, 2023, 6:18am UTC](https://forum.digikey.com/t/topic/36641 "2023-11-14T06:18:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kevin\_6462](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/kevin_6462/32/8856_2.png) [@Kevin\_6462](https://forum.digikey.com/u/Kevin_6462)\
**Post date:** [November 14, 2023, 6:18am UTC](https://forum.digikey.com/t/topic/36641/1 "2023-11-14T06:18:14Z")

</div>

我們收到一些關於模組化纜線引腳排列的詢問。

在選擇[模組化纜線](https://www.digikey.tw/zh/products/filter/modular-cables/451https://www.digikey.tw/zh/products/filter/modular-cables/451)時，其中要考慮是引腳排列樣式，在我們官網上可以看到以下顯示的排列樣式的選項。

![image](https://global.discourse-cdn.com/digikey/original/3X/3/d/3de79e42121e4e284678cbaf58d853f72a5d9b22.png)

如果選擇反向和標準樣式，將顯示不同類型[纜線](https://www.digikey.tw/short/3037vfzz)。

**反向（Reverse）和標準（Standard）樣式有什麼差別？**

如果想確定扁平纜线的樣式，其中一個較快捷的方法是首先將纜線平放。

**反向樣式** 的插頭是其中一端的凸片向上，另一端的凸片則是向下。  
這樣的引腳佈局一般被稱為「straight through 直線」。  
這些纜線常用於資料傳輸。

![image](https://global.discourse-cdn.com/digikey/original/3X/a/c/aca7427fe7c2351ec526259f85a31e04dd860c3e.jpeg)

參考 [Assmann](https://www.digikey.tw/zh/supplier-centers/assmann-wsw-components) 的 AT-S-26-6/6/S-25/R（[A2663R-25-ND](https://www.digikey.tw/zh/products/detail/assmann-wsw-components/AT-S-26-6-6-S-25-R/1972687)），它是反向樣式。 根據[規格書](https://www.digikey.tw/zh/htmldatasheets/production/1336033/0/0/1/at-s-26-6-6-x-xx-r-drawing)中顯示插頭的方向和引腳排列的圖例。

![image](https://global.discourse-cdn.com/digikey/original/3X/0/e/0e1d1f944f7027ac9780357bd40721b20dd2ab44.png)

引腳將是 straight through 的。

![image](https://global.discourse-cdn.com/digikey/original/3X/6/8/680fe6536447531b600f75ccc65c758351423bba.png)

**標準樣式** 的插頭上的兩個突片位於同一側。  
由於引腳分配，有時可能將其稱為「reversed 反向」或「crossover 交叉/ 跳線 」。  
它們常用於語音傳輸，就像電話一樣。

參考 Assmann 的 AT-S-26-6/6/S-25（[A1663R-25-ND](https://www.digikey.tw/zh/products/detail/assmann-wsw-components/AT-S-26-6-6-S-25/1972602)），它是標準樣式。 根據[規格書](https://www.digikey.tw/zh/htmldatasheets/production/2014986/0/0/1/at-s-26-6-6-x-xx-drawing)中顯示插頭的方向和引腳排列的圖例。

![image](https://global.discourse-cdn.com/digikey/original/3X/9/3/9340f2b869062c2a94981735f870938de22ca8ce.png)

引腳分配將是 crossover 的。

![image](https://global.discourse-cdn.com/digikey/original/3X/6/e/6ed043f0233977e22fb47c6a13048a715043d296.png)

另一種檢查方法是並排兩端插頭，然後對比引腳排列。

![image](https://global.discourse-cdn.com/digikey/original/3X/0/c/0ccaaf33c0eb909aa8ab62bacdae4321ca00561e.png)

這方法對於盤繞式纜線組件很有幫助。 由於電纜被盤繞，插頭的方向發生了變化。

參考 Assmann 的 AT-C-26-6/6/B-10（[A1662R-10C-ND](https://www.digikey.tw/zh/products/detail/assmann-wsw-components/AT-C-26-6-6-B-10/1972705)），這將是標準樣式的扁平盤繞纜線。

[規格書](https://www.digikey.tw/zh/htmldatasheets/production/639851/0/0/1/at-c-26-6-6-x-xx-drawing)中顯示插頭上的凸片一側朝上，一側朝下。 這可能會讓人感到困惑。

![image](https://global.discourse-cdn.com/digikey/original/3X/6/3/638b0e290f6618b97786a81963bea28379a5ff3a.png)

所以需要使用第二個方法目測引腳分配。

![image](https://global.discourse-cdn.com/digikey/original/3X/1/c/1c87c1ff180fb9478d10316f70ce22be4da7712c.png)

參考 Assmann 的 AT-C-26-6/6/B-10/R（[A2662R-10C-ND](https://www.digikey.tw/zh/products/detail/assmann-wsw-components/AT-C-26-6-6-B-10-R/1972689)），這將是反向樣式的扁平盤繞纜線。  
[規格書](http://www.assmann-wsw.com/uploads/datasheets/ASS_8163_CA.pdf)顯示兩端插頭上的凸片都是在背面。同樣，這都是會讓人感到困惑。

![image](https://global.discourse-cdn.com/digikey/original/3X/e/8/e89a9e7da54c7d6b8e3bbc6354bb2d16f9d36915.png)

所以可能需要使用第二個方法目測引腳分配。

![image](https://global.discourse-cdn.com/digikey/original/3X/0/5/05fdbf8643f9ee08e59c62b019ea8e56762d82e0.png)
