# プロトタイプ回路用の迅速で簡単なヒートシンク

**URL:** <https://forum.digikey.com/t/topic/39949>\
**Category:** 電子部品技術の深層\
**Created:** [March 26, 2024, 1:15pm UTC](https://forum.digikey.com/t/topic/39949 "2024-03-26T13:15:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tsuneharu\_Fuji](https://avatars.discourse-cdn.com/v4/letter/t/54ee81/32.png) [@Tsuneharu\_Fuji](https://forum.digikey.com/u/Tsuneharu_Fuji)\
**Post date:** [March 26, 2024, 1:15pm UTC](https://forum.digikey.com/t/topic/39949/1 "2024-03-26T13:15:28Z")

</div>

* * *
 [APDahlen](https://forum.digikey.com/u/APDahlen) Applications Engineer

[ブレッドボードガイドに戻り、他の構築のヒントを見る](https://forum.digikey.com/t/4041-url/39855)

## サーマルヒートシンクとして使用できる簡単で低コストの技術は何ですか?

お気づきかもしれませんが、私はブレッドボードのプロトタイプにペーパークリップ （ペーパーバインダクリップ）をよく使用しています。 このペーパークリップは、TO-220 コンポーネントの簡単なヒートシンクとして機能します。

いくつかの例としては、次の[産業用リレー ドライバ](https://forum.digikey.com/t/mosfet/39140)（industrial relay driver）が挙げられます。

 ![Picture of a paperclip heatsink on a TO-220 transistor used as part of a relay driver.](https://global.discourse-cdn.com/digikey/original/3X/b/b/bb6c4564c2d591a043653960daaf19194f66cea3.jpeg)

もう1つは、[ハイブリッドリチウムイオンキャパシタ](https://forum.digikey.com/t/topic/39940) （hybrid Lithium-ion Capacitor、LiC）の充電に使用される電流制限レギュレータ回路内のTO-220パス デバイスです。

 ![Picture of a paper binder heatsink installed on a TO-220 transistor.](https://global.discourse-cdn.com/digikey/original/3X/d/8/d885cbf37db4bf726bdcab038e1e2e4de9617496.jpeg)

## TO-220 パッケージデバイスの制限事項

ペーパーバインダクリップのヒートシンクは理想とは程遠いですが、温度はかなり下がります。 プロトタイプから最終設計に移行するときに、スルーホールおよび面実装デバイス（SMD）に[適したヒートシンク](https://www.digikey.jp/ja/products/filter/heat-sinks/219?)（ heatsink）に切り替えることができます。

> **技術的なヒント：** ヒートシンクは電気的に回路の一部であるので注意してください。 トランジスタの金属タブとの接触を防ぐには[サーマルパッド](https://www.digikey.jp/ja/products/filter/pads-sheets/218?s=N4IgTCBcDaIC4AsCmAnAtgQwDYAIAOGAJiALoC%2BQA)（thermal pad）またはこのNPNトランジスタのリストにあるTO-220 「[フルパック](https://www.digikey.jp/ja/products/filter/single-bipolar-transistors/276?s=N4IgjCBcpgbFoDGUBmBDANgZwKYBoQB7KAbRABYwBmMAVnJAMptqsYurtpAF0CAHAC5QQAZUEAnAJYA7AOYgAvgVgBOBCGSR02fEVIcwADlUB2XgOGQxk2QsXKQAJgMA5AAquABJLQysUliChBK8ikA)（Full Pack）」デバイスを使用します。

このリンクを友人、クラスメート、同僚に転送してください。 これは、回路のプロトタイピングの時間を節約できる賢いソリューションですが、あまり知られていません。

ご健闘をお祈りします。

APDahlen

[ブレッドボードガイドに戻り、他の構築のヒントを見る](https://forum.digikey.com/t/4041-url/39855)

[オリジナル・ソース（English）](https://forum.digikey.com/t/quick-and-easy-heatsink-for-your-prototype-circuits/38013)
