# Troubleshooting Connection Issues with Neonode's Infrared Touch Sensors

**URL:** <https://forum.digikey.com/t/troubleshooting-connection-issues-with-neonodes-infrared-touch-sensors/45849>\
**Category:** Sensors Transducers\
**Tags:** sensors-transducers, neonode-incorporated, faqs, touch-sensors\
**Created:** [October 22, 2024, 8:43am UTC](https://forum.digikey.com/t/troubleshooting-connection-issues-with-neonodes-infrared-touch-sensors/45849 "2024-10-22T08:43:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![aayushi.nainwal](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/aayushi.nainwal/32/62803_2.png) [@aayushi.nainwal](https://forum.digikey.com/u/aayushi.nainwal)\
**Post date:** [October 22, 2024, 8:43am UTC](https://forum.digikey.com/t/troubleshooting-connection-issues-with-neonodes-infrared-touch-sensors/45849/1 "2024-10-22T08:43:59Z")

</div>

If you are trying to connect your [Neonode’s](https://www.digikey.com/en/supplier-centers/neonode) infrared [touch sensors](https://www.digikey.com/en/products/filter/touch-sensors/971?s=N4IgjCBcoLQCxVAYygMwIYBsDOBTANCAG4B2aWehA9lANogAcYArAOwMgC6hADgC5QQIAL6igA) to your PC and running into trouble with the sensors not being recognized, please follow these steps to troubleshoot the issue and get your sensor up and running.

### Solution:

**1. Check Requirements and Connections** : First, make sure your system meets the necessary requirements and that all cables are securely connected.

**2. Check Device Manager** : Open Device Manager and look for “HID-compliant touch screen device.” If it’s not listed, continue to the next step. If you do see it, try uninstalling the driver, restarting your computer, and then reconnecting the sensor.

**3. Reinstall the Firmware** : Begin by setting the sensor into **DFU mode**. Hold down the black button on the Neonode Interface Board while connecting it to your computer. Release the button once connected.

 ![image](https://global.discourse-cdn.com/digikey/original/3X/f/6/f6abbeef73dada1149b35bda0f65cdb288388112.png)

**4. Check Device Manager** : After connecting, check if the sensor appears in the Device Manager. If you have the **Workbench** or **zForceProgrammer** open, verify if the sensor is detected there as well.

 ![image](https://global.discourse-cdn.com/digikey/original/3X/f/8/f85efd0f69de4606cb8d7b69163547eb1f216ef8.png)

**5. If Detected** : If the sensor is recognized, ensure that the **zForceProgrammer** is installed and up to date. Upgrade the sensor firmware using the latest version.

**6. Driver Installation** : If the sensor isn’t detected, look for the **“STM32 BOOTLOADER”** driver in Device Manager.

 ![image](https://global.discourse-cdn.com/digikey/original/3X/e/8/e803fbaceff0c9a4c74dba5446b7acc163360074.png)

If it’s missing, navigate to the **zForceProgrammer directory** (defaults to C:\Program Files (x86)\Neonode\zForceProgrammer\Drivers\CubeProgrammer\_DFU\_Drivers) and double-click the **dpinst\_amd64** application to install the driver. Restart your computer and repeat the previous steps.

By following these steps, you should be able to get your sensor connected and working!

> **Applicable Part Numbers**
>
> | DigiKey Part Number | Manufacturer Part Number |
> | --- | --- |
> | 1816-1016-ND | NN AMC 1150 PC01 |
> | 1816-1000-ND | NNAMC1220PC01 |
> | 1816-1002-ND | NNAMC1800PC01 |
> | 1816-NNAMC1801PC01-ND | NN AMC 1801 PC01 |
> | 1816-1001-ND | NNAMC1580PC01 |
> | 1816-1004-ND | NNAMC2300PC01 |
> | 1816-1003-ND | NNAMC2090PC01 |
> | 1816-NNAMC2301PC01-ND | NN AMC 2301 PC01 |
> | 1816-NNAMC2951PC01-ND | NN AMC 2951 PC01 |
> | 1816-1018-ND | NN AMC 3100 PC01 |
> | 1816-1005-ND | NNAMC2950PC01 |
> | 1816-NNAMC3461PC01-ND | NN AMC 3461 PC01 |
> | 1816-1006-ND | NNAMC3460PC01 |
> | 1816-NNAMC1221PC01-ND | NN AMC 1221 PC01 |
> | 1816-NNAMC1581PC01-ND | NN AMC 1581 PC01 |
> | 1816-NNAMC2091PC01-ND | NN AMC 2091 PC01 |
> | 1816-NNAMC3101PC01-ND | NN AMC 3101 PC01 |
> | 1816-NNAMC1151PC01-ND | NN AMC 1151 PC01 |
