# Vintage Transitor

**URL:** <https://forum.digikey.com/t/vintage-transitor/64081>\
**Category:** Discrete Semiconductor Products\
**Tags:** cross-reference, fairchild-semiconductor, onsemi, transistors\
**Created:** [January 12, 2026, 7:13pm UTC](https://forum.digikey.com/t/vintage-transitor/64081 "2026-01-12T19:13:56Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![egengenbach](https://avatars.discourse-cdn.com/v4/letter/e/df788c/32.png) [@egengenbach](https://forum.digikey.com/u/egengenbach)\
**Post date:** [January 12, 2026, 7:13pm UTC](https://forum.digikey.com/t/vintage-transitor/64081/1 "2026-01-12T19:13:56Z")

</div>

I am replace a 1970’s transistor(2SC458) and ordered a KSC1845 one. Actually 20 of them. The data sheet shows it as ECB pinout but I recieved a JCC1845 and the pinout is CEB reversed it’s BCE. Can I just solder it in reverse?

---

<div class="post-metadata">

**Author:** ![chris\_groom](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/chris_groom/32/54044_2.png) [@chris\_groom](https://forum.digikey.com/u/chris_groom)\
**Post date:** [January 12, 2026, 7:33pm UTC](https://forum.digikey.com/t/vintage-transitor/64081/2 "2026-01-12T19:33:16Z")

</div>

Hello and welcome to the TechForum @egengenbach! From what I can tell the pinout should be the same between the [KSC1845](https://www.digikey.com/en/products/filter/transistors/bipolar-bjt/single-bipolar-transistors/276?s=N4IgTCBcDaINIGUDCBGAHAFgKwgLoF8g) and JCC1845, ECB. This matches up to the pinout I found for 2SC458 so I would wager that you don’t even need to reverse it when you place it on the board.

That said, I am curious to know how you found that the pinout on the JCC1845 was reversed? Definitely worth looking into if that’s correct.

---

<div class="post-metadata">

**Author:** ![egengenbach](https://avatars.discourse-cdn.com/v4/letter/e/df788c/32.png) [@egengenbach](https://forum.digikey.com/u/egengenbach)\
**Post date:** [January 12, 2026, 8:56pm UTC](https://forum.digikey.com/t/vintage-transitor/64081/3 "2026-01-12T20:56:24Z")

</div>

I used a transistor tester and check the result with a multimeter set to diode to find E,C and B.

---

<div class="post-metadata">

**Author:** ![egengenbach](https://avatars.discourse-cdn.com/v4/letter/e/df788c/32.png) [@egengenbach](https://forum.digikey.com/u/egengenbach)\
**Post date:** [January 13, 2026, 1:49pm UTC](https://forum.digikey.com/t/vintage-transitor/64081/4 "2026-01-13T13:49:18Z")

</div>

I b arrowed a higher priced tester and the pinout is correct. My tester read the ECB incorrectly. sorry for the misinformation.

---

<div class="post-metadata">

**Author:** ![chris\_groom](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/chris_groom/32/54044_2.png) [@chris\_groom](https://forum.digikey.com/u/chris_groom)\
**Post date:** [January 13, 2026, 11:34pm UTC](https://forum.digikey.com/t/vintage-transitor/64081/5 "2026-01-13T23:34:00Z")

</div>

Thanks for the update! I was really scratching my head on this one, we were about to contact the manufacturer to see if there was a bad lot or something of the like. Good to know everything seems to be working out.
