# Weller Toolsのはんだ付けステーションのキャリブレーション

**URL:** <https://forum.digikey.com/t/weller-tools/29776>\
**Category:** よくある質問\
**Tags:** weller\
**Created:** [March 28, 2023, 3:15pm UTC](https://forum.digikey.com/t/weller-tools/29776 "2023-03-28T15:15:48Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tsuneharu\_Fuji](https://avatars.discourse-cdn.com/v4/letter/t/54ee81/32.png) [@Tsuneharu\_Fuji](https://forum.digikey.com/u/Tsuneharu_Fuji)\
**Post date:** [March 28, 2023, 3:15pm UTC](https://forum.digikey.com/t/weller-tools/29776/1 "2023-03-28T15:15:48Z")

</div>

Wellerのはんだ付けシステムのキャリブレーションは不要です。Wellerのヒーター設計により、はんだ付けシステムのキャリブレーションは必要ありません。

情報源 - [Weller Professional - No calibration required - EUR - en (weller-tools.com)](https://www.weller-tools.com/professional/EUR/en/Top-Menu/Know+How+and+FAQ/Know-How+Soldering/No+calibration+required)

> **適用部品**
>
> T0053334699N  
> T0053336699N  
> T0053338699N  
> T0053355699N  
> T0053364699N  
> T0053364899N  
> T0053366699N  
> T0053368699N  
> T0053377699N  
> T0053378699N  
> T0053379699N  
> T0053380270N  
> T0053380699N  
> T0053419699N  
> T0053420699N  
> T0053421699N  
> T0053426699N  
> T0053451299  
> T0053452299  
> WAD101N  
> WD1MN  
> WDD81XN  
> WR2000N  
> WR2000VXN  
> WR2000XN  
> WR2N  
> WR3000MN  
> WR3000TAN  
> WR3000TSN  
> WR3MEN  
> WR3MN  
> WR5000MN  
> WT1010HN  
> WT1010N  
> WT1011HN  
> WT1011N  
> WT1012N  
> WT1013N  
> WT1HN  
> WT1N  
> WT2010M  
> WT2021MS  
> WT2M  
> WTBR1000FTLCA  
> WTHA1N  
> WX1010N  
> WX1011N  
> WX1012N  
> WX1N  
> WX2020N  
> WX2021N  
> WX2022N  
> WX2023N  
> WX2024N  
> WX2N  
> WXA2010N  
> WXA2N  
> WXD2010N  
> WXD2020N  
> WXD2N  
> WXR3001N  
> WXR3002N  
> WXR3003N  
> WXR3N

  
  
  

[オリジナル・ソース（English）](https://forum.digikey.com/t/weller-tools-solder-station-calibration/27867)