# What are soldering methods and conditions for a basic switch?

**URL:** <https://forum.digikey.com/t/what-are-soldering-methods-and-conditions-for-a-basic-switch/35417>\
**Category:** Switches\
**Tags:** switches, electromechanical, omron, faqs\
**Created:** [October 4, 2023, 9:46pm UTC](https://forum.digikey.com/t/what-are-soldering-methods-and-conditions-for-a-basic-switch/35417 "2023-10-04T21:46:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![AaronRollens](https://sea2.discourse-cdn.com/digikey/user_avatar/forum.digikey.com/aaronrollens/32/8752_2.png) [@AaronRollens](https://forum.digikey.com/u/AaronRollens)\
**Post date:** [October 4, 2023, 9:46pm UTC](https://forum.digikey.com/t/what-are-soldering-methods-and-conditions-for-a-basic-switch/35417/1 "2023-10-04T21:46:47Z")

</div>

### Question:

What are soldering methods and conditions for a basic switch?

![Block](https://global.discourse-cdn.com/digikey/original/3X/5/5/55dcf4301ea7c5ffe6276999c26abe879bc7edff.png)

### Answer:

In addition to the basic soldering method of basic switches (see Explanation), note the following:

- Soldering operation should be performed at or below the temperature and time specified in the specifications, and external force should not be applied for 1 minute after soldering.
- Pay attention to the insulation distance after soldering.
- When soldering to PWB, apply flux inhibitor (such as Surflon) to the switch mounting surface before use.
- Do not clean open type switches after soldering.

![Block](https://global.discourse-cdn.com/digikey/original/3X/5/5/55dcf4301ea7c5ffe6276999c26abe879bc7edff.png)

### Explanation:

The basic soldering method of basic switches is shown below.

 ![image](https://global.discourse-cdn.com/digikey/original/3X/d/1/d1aeba9eb1f41bba5f12663a9ebcd6b3ed230f18.png)  
 ![image](https://global.discourse-cdn.com/digikey/original/3X/4/3/433a5186b7b6b70e9df0b7e8512501321cd0f5f6.png)  
 ![image](https://global.discourse-cdn.com/digikey/original/3X/6/c/6c3a0b3e45ae453fa4fae91b3b012d7dc4caab2c.png)

![Block](https://global.discourse-cdn.com/digikey/original/3X/5/5/55dcf4301ea7c5ffe6276999c26abe879bc7edff.png)

#### Product category

Switches Basic Switches

* * *

#### Classification

Mounting, Storage

* * *

#### Related keywords

Basic Switch  
Soldering Method  
Flux Inhibitor  
Twist Lead Wires  
Short Circuit Failure  
Solder Ball  
Solder Waste  
Soldering Temperature

![Block](https://global.discourse-cdn.com/digikey/original/3X/5/5/55dcf4301ea7c5ffe6276999c26abe879bc7edff.png)

Please visit the link below to see this product category on the Digi-Key website  
[Switches | DigiKey Electronics](https://www.digikey.com/en/products/category/switches/15)

  

This FAQ has been brought to you courtesy of

 ![image](https://global.discourse-cdn.com/digikey/original/3X/f/4/f485a70029a79ec3da7b845324595e6830f6a28e.png)  
  
  
Please click the link below to view the original FAQ

[https://components.omron.com/us-en/faq/switches/FAQE20038](https://components.omron.com/us-en/faq/switches/FAQE20038)