# \#anysolar

**URL:** https://forum.digikey.com/tag/anysolar/3959.md

[Latest](https://forum.digikey.com/latest.md) · [Categories](https://forum.digikey.com/categories.md) · [Tags](https://forum.digikey.com/tags.md)

---

## [塗層或包覆成型太陽能板的注意事項](https://forum.digikey.com/t/topic/57648)

<div class="topic-metadata">

**Author:** [@Barley\_Li](https://forum.digikey.com/u/Barley_Li)\
**Replies:** 0\
**Last updated:** [July 22, 2025, 8:03am UTC](https://forum.digikey.com/t/topic/57648 "2025-07-22T08:03:46Z")

</div>

根撳 ANYSOLAR 表示，由於可能存在分層問題，不建議在太陽能板上進行塗層或包覆成型 (overmolding) 。客戶可能會嘗試使用透明材料在太陽能板上進行塗層或包覆成型，但經常會在熱循環測試或長時間戶外使用後，由於紫外線照射，塗層或包覆成型材料與太陽能電池板之間的界面出現分層現象。因此，不建議在產品上進行塗層或包覆成型。 如果客戶需要保護太陽能電池板免受機械損壞，建議在太陽能電池板上使用保護罩，例如透明 PC 或類似玻璃的保護…

---

## [ソーラーパネルへのコーティングやオーバーモールディングの注意事項](https://forum.digikey.com/t/topic/35687)

<div class="topic-metadata">

**Author:** [@Tsuneharu\_Fuji](https://forum.digikey.com/u/Tsuneharu_Fuji)\
**Replies:** 0\
**Last updated:** [October 16, 2023, 5:07am UTC](https://forum.digikey.com/t/topic/35687 "2023-10-16T05:07:03Z")

</div>

ANYSOLARによると、剥離の問題が発生する可能性があるため、ソーラーパネルのコーティングやモールド成形は推奨されていません。「お客様はソーラーパネルを透明材料でコーティングまたはモールド成形しようとされていますが、熱サイクル試験後や紫外線による長時間の屋外使用後に、コーティングまたはモールド成形材料とソーラーパネルとの界面で層間剥離が観察されることがよくあります。そのため、当社製品へのコーティングやモールド成形は推奨しておりません。…

---

## [Caution to Coating or Overmolding Solar Panels](https://forum.digikey.com/t/caution-to-coating-or-overmolding-solar-panels/34943)

<div class="topic-metadata">

**Author:** [@Ryan\_2724](https://forum.digikey.com/u/Ryan_2724)\
**Replies:** 0\
**Last updated:** [September 18, 2023, 10:46pm UTC](https://forum.digikey.com/t/caution-to-coating-or-overmolding-solar-panels/34943 "2023-09-18T22:46:34Z")

</div>

According to ANYSOLAR, coating or molding solar panels is not recommended due to possible delamination issues. Customers may try to coat or mold solar panels with transparent materials, but often observe delamination at …
