# \#circuit-protection

**URL:** https://forum.digikey.com/tag/circuit-protection/2178.md

[Latest](https://forum.digikey.com/latest.md) · [Categories](https://forum.digikey.com/categories.md) · [Tags](https://forum.digikey.com/tags.md)

---

## [TVS 선택 시 고려해야 할 주요 전압 및 전류 파라미터는 무엇인가요?](https://forum.digikey.com/t/tvs/71924)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 14, 2026, 5:47am UTC](https://forum.digikey.com/t/tvs/71924 "2026-09-14T05:47:28Z")

</div>

TVS(Transient Voltage Suppression, 과도 전압 억제) 다이오드는 민감한 전자 부품에 손상을 줄 수 있는 전압 스파이크가 이들에 도달하기 전에 억제할 수 있도록 설계된 반도체 보호 다이오드입니다. 정상 동작 시, 이 소자는 역방향 스탠드오프 전압(VRWM)까지 비전도 상태를 유지합니다. ESD(정전기 방전) 현상, 유도성 부하 스위칭 서지 또는 낙뢰로 인한 과전압과 …

---

## [HWB6/HWB12 Littelfuse Inc. Crimp Contacts](https://forum.digikey.com/t/hwb6-hwb12-littelfuse-inc-crimp-contacts/19839)

<div class="topic-metadata">

**Author:** [@Jeff\_2258](https://forum.digikey.com/u/Jeff_2258)\
**Replies:** 3\
**Last updated:** [May 12, 2026, 3:38pm UTC](https://forum.digikey.com/t/hwb6-hwb12-littelfuse-inc-crimp-contacts/19839 "2026-05-12T15:38:37Z")

</div>

The Littelfuse Inc. HWB6 and HWB12 sealed power distribution module series use TE Connectivity AMP Connectors MCP Series contacts and cable seals. DK Part # Mfr Part # Mfr Description Cable Seal 17-1-968857…

---

## [가스 방전관은 주로 어떤 분야에 적용되며, 극성이 있나요?](https://forum.digikey.com/t/topic/60817)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 30, 2025, 9:01am UTC](https://forum.digikey.com/t/topic/60817 "2025-09-30T09:01:52Z")

</div>

질문: 가스 방전관(GDT)은 주로 어떤 분야에 사용되며, 극성이나 방향성이 있나요? 답변: 극성은 없습니다. 이러한 소자는 (낮은 정전용량 특성으로 인해) 통신 제품에 주로 적용되며 전원 공급 장치의 공통 모드 보호에도 사용됩니다. 가스 방전관 피뢰기(GDT)는 극성이 없습니다. 회로에 어떻게 연결되든, 전압이 일정 수준에 도달하면 정상적으로 동작하여 과도 전압을 방전시킵니다. …

---

## [Littelfuse 회로 보호 부품은 과전압 및 과전류로부터 보호할 수 있나요?](https://forum.digikey.com/t/littelfuse/60816)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 30, 2025, 8:44am UTC](https://forum.digikey.com/t/littelfuse/60816 "2025-09-30T08:44:30Z")

</div>

질문: Littelfuse 회로 보호 제품은 과전압과 과전류로부터 뒷단의 회로가 오작동 하는 것을 막을 수 있나요? 답변: 과전류는 회로에 고장이 발생했을 때 작용합니다. 퓨즈는 전원 공급을 차단하여 더 심각한 사고를 예방합니다. 과전압 보호는 낙뢰나 서지로 인해 제품이 손상되는 것을 막기 위한 것입니다. 과전류의 원인과 퓨즈의 역할 과전류란 회로 내 전류가 정상 동작 범위를 초과하…

---

## [퓨즈의 방폭 테스트는 어떻게 이해해야 하나요?](https://forum.digikey.com/t/topic/60815)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 30, 2025, 8:13am UTC](https://forum.digikey.com/t/topic/60815 "2025-09-30T08:13:57Z")

</div>

질문: 퓨즈의 방폭 테스트를 어떻게 하면 더 잘 이해할 수 있나요? 답변: 사양서에 있는 차단 용량(Interrupting Capacity) 파라미터를 확인하십시오. 이는 안전 규격 평가를 위한 매우 중요한 파라미터입니다. 예를 들어, 이 파라미터가 1.5K/250VAC로 정의되어 있다면, 이는 퓨즈 양단에 250VAC 전압이 인가되고 1.5K의 전류가 흐를 때에도 퓨즈는 회로를 안전하게 …

---

## [시간 지연 퓨즈의 타이밍을 어떻게 정확하게 알 수 있나요?](https://forum.digikey.com/t/topic/60809)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 30, 2025, 6:46am UTC](https://forum.digikey.com/t/topic/60809 "2025-09-30T06:46:23Z")

</div>

질문: 시간 지연 퓨즈의 정확한 타이밍을 어떻게 알 수 있나요? 답변: 제품 사양서의 T-I(Time-Current, 시간-전류) 곡선을 확인하십시오. 예시: DigiKey 제품 번호 F1710-ND 제조업체 Littelfuse Inc. 제조업체 제품 번호 0216008.MXP 제품 세부 정보 8 A 250 V AC DC 퓨즈 카트리지, 세라믹 홀더 필요 5mm x…

---

## [빠른 용단을 목적으로 소용량 퓨즈를 병렬 연결하여 사용할 수 있나요?](https://forum.digikey.com/t/topic/60805)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 30, 2025, 6:04am UTC](https://forum.digikey.com/t/topic/60805 "2025-09-30T06:04:21Z")

</div>

질문: 퓨즈 시스템의 응답 시간을 빠르게 하기 위해 여러 개의 소용량 퓨즈를 병렬로 사용할 수 있나요? 답변: 일반적으로 퓨즈를 병렬로 연결하면 퓨즈 시스템의 정격 전류를 증가시킬 수 있습니다. 그러나 용단 속도는 T-C 곡선과 I²t에 의해 결정됩니다. 일반적인 상황에서 퓨즈를 병렬로 연결하면 전체 정격 전류가 증가합니다. 병렬 회로의 총 전류는 각 분기 전류의 합이기 때문입니다. 퓨…

---

## [가스 방전관(GDT)은 어떻게 분류되나요?](https://forum.digikey.com/t/gdt/60798)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 30, 2025, 2:36am UTC](https://forum.digikey.com/t/gdt/60798 "2025-09-30T02:36:18Z")

</div>

가스 방전관 서지 억제기에 사용되는 분류 용어가 궁금하실 수 있습니다. 이러한 용어들은 어떤 의미를 가지며, 부품의 사용 방식에 어떤 영향을 줄까요? 가스 방전관은 종종 GDT로 불리며, “고전압 또는 저전압, 그리고 고서지 내성 또는 저서지 내성”으로 분류됩니다. Littelfuse의 GTCS23-750M-R01-2를 예로 들어 보겠습니다. DigiKey 제품 번호 GTC…

---

## [일반적으로 어떤 상황에서 AC 퓨즈를 DC 회로에 직접 사용할 수 있나요?](https://forum.digikey.com/t/ac-dc/60749)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 29, 2025, 8:17am UTC](https://forum.digikey.com/t/ac-dc/60749 "2025-09-29T08:17:07Z")

</div>

질문: 일반적으로 어떤 상황에서 AC 퓨즈를 DC 회로에 사용할 수 있나요? 경험에 따른 규칙 같은 것이 있나요? 답변: 권장되지는 않지만, 경험에 따르면, 220 VAC 정격 퓨즈를 100 V 이하의 DC 환경에 사용하는 경우 일반적으로 문제가 발생하지 않습니다. 이렇게 사용하는 것은 일반적인 사양을 충족하지 않으며 특정 위험을 수반할 수 있습니다. 여러분의 시스템이 민감하거나 또는 제…

---

## [차량 충전 솔루션의 기술적 혁신, Littelfuse의 새로운 조합 MOV + SIDACtor® 사이리스터](https://forum.digikey.com/t/littelfuse-mov-sidactor/60736)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 29, 2025, 1:20am UTC](https://forum.digikey.com/t/littelfuse-mov-sidactor/60736 "2025-09-29T01:20:28Z")

</div>

Littelfuse는 SIDACtor 계열 사이리스터 소자를 통해 차량 충전 보호 기술을 새롭게 선보였습니다. 이러한 소자는 차량 충전 시스템에 어떻게 도움이 될 수 있을까요? 번개가 치고 난 후에도 클램핑 전압이 낮고 누설 전류가 작기 때문에, 장치에 우수한 보호 성능을 제공합니다. 예를 들어, 부품 번호 P0220SALRP를 살펴보면, DigiKey 제품 번호 P0220…

---

## [과전류 및 과전압 보호를 위해 일반적으로 고려해야 할 설계 사항은 무엇이 있나요?](https://forum.digikey.com/t/topic/60530)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 23, 2025, 7:09am UTC](https://forum.digikey.com/t/topic/60530 "2025-09-23T07:09:11Z")

</div>

질문: 시스템에 과전류 및 과전압 보호를 설계할 때 고려해야 할 일반적인 설계 요소는 무엇인가요? 답변: 과전류의 경우, 전압, 동작 전류, 주변 온도, 낙뢰 조건, 단락 전류, 서지 영향 등을 고려해야 하며, 과전압의 경우, 낙뢰 조건, 동작 전압, 주변 온도 등을 고려해야 합니다. 과전류 보호를 위한 설계 고려사항: 전압: 회로나 장치가 정상 동작 중에 견딜 수 있는 전압 범위는 과…

---

## [표면 실장 퓨즈와 스루홀 퓨즈 간 주요한 차이가 있는 파라미터에는 무엇이 있나요?](https://forum.digikey.com/t/topic/60467)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 22, 2025, 5:18am UTC](https://forum.digikey.com/t/topic/60467 "2025-09-22T05:18:31Z")

</div>

질문: 표면 실장 퓨즈와 스루홀 퓨즈의 주요 파라미터 차이는 무엇인가요? 답변: 가장 큰 차이는 일반적으로 퓨즈의 정격 전압과 전류의 크기입니다. 일반적으로 스루홀 퓨즈가 더 높은 전압과 전류를 처리할 수 있는 반면, 표면 실장 퓨즈는 전압과 전류가 낮은 응용 분야에 사용됩니다. 하지만 이는 절대적인 규칙은 아니며, 현재 Littelfuse의 일부 표면 실장 퓨즈는 최대 200A까지도 처리…

---

## [Littelfuse 회로 보호 부품에서 I²t의 I는 어떤 종류의 전류인가요?](https://forum.digikey.com/t/littelfuse-i-t-i/60464)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 22, 2025, 2:58am UTC](https://forum.digikey.com/t/littelfuse-i-t-i/60464 "2025-09-22T02:58:24Z")

</div>

Littelfuse 회로 보호 제품에서 I²t라는 수치를 볼 수 있는데, 이것이 무엇을 의미하는지 궁금할 수 있습니다. I²t에서 'I’는 어떤 전류를 의미할까요? 입력 전류, 출력 전류, 아니면 버스 전류일까요? 사실, 정답은 위의 어느 것도 아닙니다. 이는 전원 온/오프 시, 유도성 부하 등에서 발생하는 순간적인 돌입 전류를 의미합니다. 예시: DigiKey 제품 번호 P…

---

## [PTC 리셋 가능 퓨즈와 금속 퓨즈는 언제 사용해야 하나요?](https://forum.digikey.com/t/ptc/60462)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 22, 2025, 1:47am UTC](https://forum.digikey.com/t/ptc/60462 "2025-09-22T01:47:11Z")

</div>

질문: 언제 회로에 일회용 금속 퓨즈 대신 PTC 리셋형 퓨즈를 사용해야 하나요? 그리고 그 반대의 경우는 언제인가요? 답변: 저전압, 저전류, 간헐적인 기능 장애가 발생하지만 제품 자체에는 문제가 없고 퓨즈를 교체할 필요가 없는 경우에는 PTC 리셋형 퓨즈가 이상적입니다. 그 외 대부분의 경우에는 금속 일회용 퓨즈가 더 적합합니다. PTC 리셋 가능 퓨즈는 저전압, 저전류 환경의 회…

---

## [AC 및 DC 입력 단자에서 사용할 과전압/과전류 보호 부품을 선택할 때 어떤 차이가 있나요?](https://forum.digikey.com/t/ac-dc/60404)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 19, 2025, 9:02am UTC](https://forum.digikey.com/t/ac-dc/60404 "2025-09-19T09:02:22Z")

</div>

질문: AC 입력 단자와 DC 입력 단자에서 과전압 및 과전류 보호 부품을 선택할 때 큰 차이가 있나요? 답변: 차이가 있습니다. AC 또는 DC 전압이 높을수록 그 차이는 더 커집니다. 본 게시글은 AC(교류) 및 DC(직류) 전원의 입력 단자에 대한 과전압 및 과전류 보호 소자 선택에 있어서의 차이에 대한 것으로, 여기에 포함되는 보호 소자에는 퓨즈, 배리스터, MOV, 회로 차단기 …

---

## [Littelfuse의 과전류 보호 퓨즈는 자동 복귀 기능이 있나요?](https://forum.digikey.com/t/littelfuse/60349)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 18, 2025, 8:21am UTC](https://forum.digikey.com/t/littelfuse/60349 "2025-09-18T08:21:03Z")

</div>

질문: Littelfuse의 과전류 보호 퓨즈는 퓨즈 교체 없이 자동으로 복구되는 기능을 포함하고 있나요? 답변: 아니요. 과전류 보호 퓨즈는 한 번만 사용할 수 있는 소자입니다. 열 용융의 원리 퓨즈는 일반적으로 녹는점이 낮은 금속 또는 합금으로 만들어집니다. 회로의 전류가 정격 전류를 초과하면, 전류로 인해 발생한 열에 의해 퓨즈의 온도가 급격히 상승합니다. 이 퓨즈 동작 과정은 되…

---

## [과전압 보호를 위해서는 금속 산화물 배리스터를 어떻게 선택해야 하나요?](https://forum.digikey.com/t/topic/60344)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 18, 2025, 7:03am UTC](https://forum.digikey.com/t/topic/60344 "2025-09-18T07:03:45Z")

</div>

응용 분야에 적합한 MOV(Metal Oxide Varistor, 금속 산화물 배리스터)를 선정할 때, 가장 중요한 요소는 서지 처리 용량이어야 합니다. 서지 처리 용량과 관련해서는 해당 소자의 사양서를 참조하시기 바랍니다. 일반적으로 14mm 배리스터를 선택하며, 예상 작동 전압의 약 1.4~1.7배 정도의 전압 마진을 남겨두는 것이 좋습니다. DigiKey 제품 번호 F6419-…

---

## [Littelfuse new MOV+Sidactor thyristor vehicle charging solution technological innovations](https://forum.digikey.com/t/littelfuse-new-mov-sidactor-thyristor-vehicle-charging-solution-technological-innovations/48481)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [January 27, 2025, 7:13am UTC](https://forum.digikey.com/t/littelfuse-new-mov-sidactor-thyristor-vehicle-charging-solution-technological-innovations/48481 "2025-01-27T07:13:52Z")

</div>

Littelfuse has introduced new vehicle charging protection technology with their SIDACtor series of thyrister devices. How can these devices help your vehicle charging systems? After a lightning strike, the clamping v…

---

## [가스 방전관(Gas Discharge Tubes, GDT)과 금속 산화물 배리스터(Metal Oxide Varistor, MOV)의 차이점은 무엇인가요?](https://forum.digikey.com/t/gas-discharge-tubes-gdt-metal-oxide-varistor-mov/59990)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 9, 2025, 7:24am UTC](https://forum.digikey.com/t/gas-discharge-tubes-gdt-metal-oxide-varistor-mov/59990 "2025-09-09T07:24:45Z")

</div>

가스 방전관(Gas Discharge Tubes, GDT)과 금속 산화물 배리스터(Metal Oxide Varistor, MOV) 모두 널리 사용되는 회로 보호 소자입니다. 두 부품 간의 동작 방식이 어떻게 다른지 궁금하실 수 있습니다. 각 부품은 어떻게 동작하며, 어떤 부품이 여러분에게 적합할까요? 간략하게 얘기하자면, 가스 방전관이 크로우바(Crowbar) 기술을 채택하여 동…

---

## [What are the possible failure situations of the resettable fuse PPTC?](https://forum.digikey.com/t/what-are-the-possible-failure-situations-of-the-resettable-fuse-pptc/56299)

<div class="topic-metadata">

**Author:** [@Angus\_Lai](https://forum.digikey.com/u/Angus_Lai)\
**Replies:** 0\
**Last updated:** [June 12, 2025, 7:30am UTC](https://forum.digikey.com/t/what-are-the-possible-failure-situations-of-the-resettable-fuse-pptc/56299 "2025-06-12T07:30:38Z")

</div>

The possible failure situations of a PPTC (resettable fuse) include the following: Long-term overcurrent: When the PPTC encounters a long-term small overcurrent, although it will not act immediately, it may gradually a…

---

## [What are the main parameters of surge voltage and current when selecting TVS?](https://forum.digikey.com/t/what-are-the-main-parameters-of-surge-voltage-and-current-when-selecting-tvs/55867)

<div class="topic-metadata">

**Author:** [@Angus\_Lai](https://forum.digikey.com/u/Angus_Lai)\
**Replies:** 0\
**Last updated:** [May 30, 2025, 8:06am UTC](https://forum.digikey.com/t/what-are-the-main-parameters-of-surge-voltage-and-current-when-selecting-tvs/55867 "2025-05-30T08:06:58Z")

</div>

When selecting TVS (Transient Voltage Suppression) diodes, the following voltage and current parameters are your main concerns: 1. Maximum reverse working voltage (V\_RWM): This is the maximum reverse voltage th…

---

## [Key Factors in Selecting Protection Components](https://forum.digikey.com/t/key-factors-in-selecting-protection-components/55828)

<div class="topic-metadata">

**Author:** [@Angus\_Lai](https://forum.digikey.com/u/Angus_Lai)\
**Replies:** 0\
**Last updated:** [May 29, 2025, 9:17am UTC](https://forum.digikey.com/t/key-factors-in-selecting-protection-components/55828 "2025-05-29T09:17:54Z")

</div>

When selecting the right protection components for your design, you should consider the following key indicators and considerations to ensure that the component you select can effectively protect the circuit and meet you…

---

## [Electronic Circuit Breaker Protector for Industrial Control](https://forum.digikey.com/t/electronic-circuit-breaker-protector-for-industrial-control/55325)

<div class="topic-metadata">

**Author:** [@APDahlen](https://forum.digikey.com/u/APDahlen)\
**Replies:** 0\
**Last updated:** [May 12, 2025, 8:15pm UTC](https://forum.digikey.com/t/electronic-circuit-breaker-protector-for-industrial-control/55325 "2025-05-12T20:15:36Z")

</div>

The Electronic Circuit Protector (ECP) is a solid-state current interrupter. Instead of using a traditional electromagnetic contact mechanism, the protector uses a power semiconductor plus electronic control circuitry to…

---

## [AFCI can I use it in a power cord that runs garden items like lawn mowers and tools like power saws?](https://forum.digikey.com/t/afci-can-i-use-it-in-a-power-cord-that-runs-garden-items-like-lawn-mowers-and-tools-like-power-saws/52655)

<div class="topic-metadata">

**Author:** [@martin.hass](https://forum.digikey.com/u/martin.hass)\
**Replies:** 4\
**Last updated:** [March 14, 2025, 7:40pm UTC](https://forum.digikey.com/t/afci-can-i-use-it-in-a-power-cord-that-runs-garden-items-like-lawn-mowers-and-tools-like-power-saws/52655 "2025-03-14T19:40:03Z")

</div>

AFCI can I use it in a power cord that runs garden items like lawnmowers and tools like power saws? Are there any (recommendations please) that will work?) and will not trip unnecessarily due to electric noise/arcing?

---

## [Bourns SinglFuse™ FAQ](https://forum.digikey.com/t/bourns-singlfuse-faq/47837)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [January 9, 2025, 8:18am UTC](https://forum.digikey.com/t/bourns-singlfuse-faq/47837 "2025-01-09T08:18:17Z")

</div>

퓨즈는 헷갈릴 수 있습니다. 다음은 Bourns SingleFuse™에 대해 자주 묻는 질문들입니다. 온도에 따라 퓨즈를 디레이팅 할 필요가 있나요? 네, 필요합니다. 모든 규격서에서 디레이팅 차트를 발견할 수 있습니다. 퓨즈는 온도에 따라 전류 전달 능력이 다르므로 설계 단계에서 디레이팅 비율을 고려해야만 합니다. 적절한 퓨즈 전류는 어떻게 선택해야 하나요? 퓨즈 정격은 회로의 최대…

---

## [Bourns SinglFuse™의 부품 번호 체계](https://forum.digikey.com/t/bourns-singlfuse/47838)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [January 9, 2025, 8:29am UTC](https://forum.digikey.com/t/bourns-singlfuse/47838 "2025-01-09T08:29:38Z")

</div>

Bourns의 SinglFuse™ 계열 퓨즈를 살펴보면, 부품 번호는 아래 SF 계열의 규격서에서 볼 수 있듯이 5개의 부분으로 나누어집니다. ▶ 적용 가능한 부품 번호 영문 원본: Bourns SinglFuse Part number breakdown

---

## [GDT(Gas Discharge Tubes, 가스 방전관)의 극성](https://forum.digikey.com/t/gdt-gas-discharge-tubes/47645)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [January 3, 2025, 8:42am UTC](https://forum.digikey.com/t/gdt-gas-discharge-tubes/47645 "2025-01-03T08:42:43Z")

</div>

디지키에서는 GDT, 일명 가스 방전관 어레스터의 극성을 찾는 방법에 대한 질문을 받곤 합니다. 그러나 이러한 부품은 “음극” 또는 “양극” 부분이 없는 비극성이어서 논란의 여지가 있습니다. 혼란을 유발하는 요인 중 하나는 회로도에서 GDT의 기호 내부에 점이 표시되어 있을 수 있는데, 이를 극성을 나타내는 것으로 해석하기 때문입니다. 그러나 실제로는 그렇지 않으며, 이 점은 단순히 가스가…

---

## [배리스터의 고장 모드는 무엇인가요?](https://forum.digikey.com/t/topic/47597)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [January 2, 2025, 7:24am UTC](https://forum.digikey.com/t/topic/47597 "2025-01-02T07:24:13Z")

</div>

배리스터는 과도한 전압이 인가되면 단락됩니다. 이 부품은 사전에 정해진 전압이 부품에 걸릴 때까지 졀연을 유지하는 물질로 만들어집니다. 이 전압이 발생하면, 그림 1에서와 같이 애벌런치 항복(avalanche breakdown)에 의해 배리스터는 전류 션트처럼 동작하게 됩니다. 이는 보호 회로의 고장이 감지되지 않을 경우 발생할 수 있는 부하의 손상을 방지합니다. 배리스터를 사용할 때는 반복…

---

## [Thermal Cutoffs (Thermal Fuses)](https://forum.digikey.com/t/thermal-cutoffs-thermal-fuses/32513)

<div class="topic-metadata">

**Author:** [@raelynn.roen](https://forum.digikey.com/u/raelynn.roen)\
**Replies:** 4\
**Last updated:** [September 16, 2024, 2:33pm UTC](https://forum.digikey.com/t/thermal-cutoffs-thermal-fuses/32513 "2024-09-16T14:33:59Z")

</div>

This Product Selection Guide contains information to help select products in the Thermal Cutoffs category on DigiKey.com Thermal Cutoffs (Thermal Fuses) are devices designed to keep components safe in situations when a…

---

## [Semtech Corporation의 RCLAMP0821P.TCT와 RCLAMP0821P의 차이점](https://forum.digikey.com/t/semtech-corporation-rclamp0821p-tct-rclamp0821p/44821)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [September 12, 2024, 2:08am UTC](https://forum.digikey.com/t/semtech-corporation-rclamp0821p-tct-rclamp0821p/44821 "2024-09-12T02:08:58Z")

</div>

Semtech Corporation의 RCLAMP0821P.TCT와 RCLAMP0821P의 차이점에 대한 질문을 자주 받습니다. TCT 접미사는 무연 부품을 나타냅니다. 기능적으로 두 부품 간에 차이는 없습니다. 해당 정보는 아래 Semtech의 웹사이트에서 확인할 수 있습니다: RClamp0821P | Ultra-Low Capacitance 1-Line ESD protection | …

[Next page](https://forum.digikey.com/tag/circuit-protection/2178.md?match_all_tags=true&page=1&tags%5B%5D=circuit-protection)
