# \#datawave

**URL:** https://forum.digikey.com/tag/datawave/2785.md

[Latest](https://forum.digikey.com/latest.md) · [Categories](https://forum.digikey.com/categories.md) · [Tags](https://forum.digikey.com/tags.md)

---

## [Can't get multiple devices to talk when using Datawave Wireless RS485 Bridge](https://forum.digikey.com/t/cant-get-multiple-devices-to-talk-when-using-datawave-wireless-rs485-bridge/19196)

<div class="topic-metadata">

**Author:** [@scosol](https://forum.digikey.com/u/scosol)\
**Replies:** 1\
**Last updated:** [January 12, 2022, 2:46pm UTC](https://forum.digikey.com/t/cant-get-multiple-devices-to-talk-when-using-datawave-wireless-rs485-bridge/19196 "2022-01-12T14:46:54Z")

</div>

This is a simple and short Modbus over RS485 setup, so I’m not sure what I’m missing. The setup works as expected when hardwired- It’s a Solar Inverter + Meter + Battery and it looks like: Meter----------Inverter------…

---

## [Datawave RS-485 Wireless Bridge WB-RS232-24HP-A](https://forum.digikey.com/t/datawave-rs-485-wireless-bridge-wb-rs232-24hp-a/12911)

<div class="topic-metadata">

**Author:** [@Hermchet](https://forum.digikey.com/u/Hermchet)\
**Replies:** 12\
**Last updated:** [March 29, 2021, 11:52pm UTC](https://forum.digikey.com/t/datawave-rs-485-wireless-bridge-wb-rs232-24hp-a/12911 "2021-03-29T23:52:48Z")

</div>

I recently purchased two Datawave RS-485 Wireless Bridge WB-RS232-24HP-A units from Digi-Key. I need to replace about a 100 foot section of a 4 wire RS-485 cable, point to point, simple application, two units. I was a…

---

## [Datawave Wireless Bridge](https://forum.digikey.com/t/datawave-wireless-bridge/7607)

<div class="topic-metadata">

**Author:** [@Rachel\_Thompson](https://forum.digikey.com/u/Rachel_Thompson)\
**Replies:** 0\
**Last updated:** [July 27, 2020, 1:50pm UTC](https://forum.digikey.com/t/datawave-wireless-bridge/7607 "2020-07-27T13:50:56Z")

</div>

The RS485 Wireless Bridge products by Datawave are designed to act as a wireless RS-485 two or four-wire cable replacement. The RS485 Wireless Bridge has a screw terminal connector for data and a micro USB port to config…

---

## [Datawave wireless bridge 24LP](https://forum.digikey.com/t/datawave-wireless-bridge-24lp/7002)

<div class="topic-metadata">

**Author:** [@steve.gardner](https://forum.digikey.com/u/steve.gardner)\
**Replies:** 0\
**Last updated:** [June 18, 2020, 9:57pm UTC](https://forum.digikey.com/t/datawave-wireless-bridge-24lp/7002 "2020-06-18T21:57:51Z")

</div>

I have my Datawave wireless bridge 24LP communicating but the field device drops communication about every 5 minutes for 1 minute. Are there any parameters that I can adjust in XCTU to make the connection more reliable?

---

## [Datawave Wireless Bridge WB-RS485-24LP-Ar](https://forum.digikey.com/t/datawave-wireless-bridge-wb-rs485-24lp-ar/6855)

<div class="topic-metadata">

**Author:** [@steve.gardner](https://forum.digikey.com/u/steve.gardner)\
**Replies:** 6\
**Last updated:** [June 12, 2020, 4:43pm UTC](https://forum.digikey.com/t/datawave-wireless-bridge-wb-rs485-24lp-ar/6855 "2020-06-12T16:43:26Z")

</div>

I need technical support to for a Datawave Wireless Bridge (WB-RS485-24LP-A) that I set to factory defaults and can no longer access using the XCTU software that is used to configure the device. I can still access it usi…
