# \#ifixit

**URL:** https://forum.digikey.com/tag/ifixit/3441.md

[Latest](https://forum.digikey.com/latest.md) · [Categories](https://forum.digikey.com/categories.md) · [Tags](https://forum.digikey.com/tags.md)

---

## [LulzbotのSide Kickベッドアライメントのアップグレードについて](https://forum.digikey.com/t/lulzbot-side-kick/30212)

<div class="topic-metadata">

**Author:** [@Tsuneharu\_Fuji](https://forum.digikey.com/u/Tsuneharu_Fuji)\
**Replies:** 0\
**Last updated:** [April 17, 2023, 3:27am UTC](https://forum.digikey.com/t/lulzbot-side-kick/30212 "2023-04-17T03:27:48Z")

</div>

LulzbotのSideKick用スチールシートアライメントのアップグレード プリントベッドにぶつかって、プリントが台無しになったことがありましたが、2～3回失敗して、この問題の解決方法に気付きました。 他の人が同じ失敗をしないようにすることができればと思っています。 多くの場合、プリンタは邪魔にならない場所に設置され、一度起動すれば、問題を引き起こすような接触はほとんどないと思います。私たちの場合は、プリンタ…

---

## [Lulzbot Side Kick Bed Alignment Upgrade](https://forum.digikey.com/t/lulzbot-side-kick-bed-alignment-upgrade/28426)

<div class="topic-metadata">

**Author:** [@AaronRollens](https://forum.digikey.com/u/AaronRollens)\
**Replies:** 0\
**Last updated:** [February 7, 2023, 6:59pm UTC](https://forum.digikey.com/t/lulzbot-side-kick-bed-alignment-upgrade/28426 "2023-02-07T18:59:32Z")

</div>

Steel Sheet alignment upgrade for the Lulzbot SideKick I have had prints ruined by a bumped print bed. I only had to have this happen a couple of times before realizing that I could solve this issue. My hope is that …
