# \#lulzbot

**URL:** https://forum.digikey.com/tag/lulzbot/3342.md

[Latest](https://forum.digikey.com/latest.md) · [Categories](https://forum.digikey.com/categories.md) · [Tags](https://forum.digikey.com/tags.md)

---

## [PTFE TUBE KIT- 2.85MM .is it compatible with ultimaker 2+](https://forum.digikey.com/t/ptfe-tube-kit-2-85mm-is-it-compatible-with-ultimaker-2/68400)

<div class="topic-metadata">

**Author:** [@manojyadov21](https://forum.digikey.com/u/manojyadov21)\
**Replies:** 7\
**Last updated:** [April 30, 2026, 4:16pm UTC](https://forum.digikey.com/t/ptfe-tube-kit-2-85mm-is-it-compatible-with-ultimaker-2/68400 "2026-04-30T16:16:19Z")

</div>

PTFE TUBE KIT- 2.85MM .is it compatible with ultimaker 2+ 3D printer.

---

## [How to Update Lulzbot Firmware?](https://forum.digikey.com/t/how-to-update-lulzbot-firmware/44679)

<div class="topic-metadata">

**Author:** [@Steven\_14444](https://forum.digikey.com/u/Steven_14444)\
**Replies:** 0\
**Last updated:** [September 5, 2024, 7:45pm UTC](https://forum.digikey.com/t/how-to-update-lulzbot-firmware/44679 "2024-09-05T19:45:17Z")

</div>

This covers how to update the firmware for a Lulzbot 3D Printer. Having the latest firmware can increase performance and can introduce new features for the printer. Download the latest CuraLE version from the Lulzbot…

---

## [Lulzbot SK175のホットエンドの交換](https://forum.digikey.com/t/lulzbot-sk175/31578)

<div class="topic-metadata">

**Author:** [@Tsuneharu\_Fuji](https://forum.digikey.com/u/Tsuneharu_Fuji)\
**Replies:** 0\
**Last updated:** [June 9, 2023, 5:09am UTC](https://forum.digikey.com/t/lulzbot-sk175/31578 "2023-06-09T05:09:12Z")

</div>

このガイドでは、SK175のホットエンドとヒートシンクを交換する方法を説明します。 3Dプリンタを使用していると、間違いなく様々な部品が摩耗し、予期せぬ破損をすることがあります。このガイドでは、LulzbotのSK175ツールヘッドのホットエンドとヒートシンクアセンブリを交換する方法を説明します。 今回の交換では、ホットエンドはLulzbotで入手しました。 本ガイドで使用する工具 サイドカッタ - 16…

---

## [LulzbotのSide Kickベッドアライメントのアップグレードについて](https://forum.digikey.com/t/lulzbot-side-kick/30212)

<div class="topic-metadata">

**Author:** [@Tsuneharu\_Fuji](https://forum.digikey.com/u/Tsuneharu_Fuji)\
**Replies:** 0\
**Last updated:** [April 17, 2023, 3:27am UTC](https://forum.digikey.com/t/lulzbot-side-kick/30212 "2023-04-17T03:27:48Z")

</div>

LulzbotのSideKick用スチールシートアライメントのアップグレード プリントベッドにぶつかって、プリントが台無しになったことがありましたが、2～3回失敗して、この問題の解決方法に気付きました。 他の人が同じ失敗をしないようにすることができればと思っています。 多くの場合、プリンタは邪魔にならない場所に設置され、一度起動すれば、問題を引き起こすような接触はほとんどないと思います。私たちの場合は、プリンタ…

---

## [Lulzbot Taz 4 PSU](https://forum.digikey.com/t/lulzbot-taz-4-psu/29602)

<div class="topic-metadata">

**Author:** [@mhiran](https://forum.digikey.com/u/mhiran)\
**Replies:** 1\
**Last updated:** [March 20, 2023, 1:21pm UTC](https://forum.digikey.com/t/lulzbot-taz-4-psu/29602 "2023-03-20T13:21:20Z")

</div>

I was wondering if Digikey have any Lulzbot taz 4 PSU units for sale in the UK? My PSU has stopped working, and I need a new one! Many thanks

---

## [Lulzbot SK175 Hotend Replacement](https://forum.digikey.com/t/lulzbot-sk175-hotend-replacement/29530)

<div class="topic-metadata">

**Author:** [@Steven\_14444](https://forum.digikey.com/u/Steven_14444)\
**Replies:** 0\
**Last updated:** [March 16, 2023, 1:43pm UTC](https://forum.digikey.com/t/lulzbot-sk175-hotend-replacement/29530 "2023-03-16T13:43:37Z")

</div>

This guide will help you replace the hot end and heatsink on the SK175. As you use your 3D printer different parts will undoubtedly wear and break unexpectedly. This guide will show how to replace the hot end and …

---

## [Lulzbot Side Kick Bed Alignment Upgrade](https://forum.digikey.com/t/lulzbot-side-kick-bed-alignment-upgrade/28426)

<div class="topic-metadata">

**Author:** [@AaronRollens](https://forum.digikey.com/u/AaronRollens)\
**Replies:** 0\
**Last updated:** [February 7, 2023, 6:59pm UTC](https://forum.digikey.com/t/lulzbot-side-kick-bed-alignment-upgrade/28426 "2023-02-07T18:59:32Z")

</div>

Steel Sheet alignment upgrade for the Lulzbot SideKick I have had prints ruined by a bumped print bed. I only had to have this happen a couple of times before realizing that I could solve this issue. My hope is that …

---

## [Multi Color Printing](https://forum.digikey.com/t/multi-color-printing/4859)

<div class="topic-metadata">

**Author:** [@DanKiviaho](https://forum.digikey.com/u/DanKiviaho)\
**Replies:** 1\
**Last updated:** [June 23, 2020, 2:17pm UTC](https://forum.digikey.com/t/multi-color-printing/4859 "2020-06-23T14:17:55Z")

</div>

Hello All, Recently I was asked to make some projects that required me to use multiple colors. I was apprehensive as I was not sure on what I had to do to get the printer to stop at a specific point. I thought that I …

---

## [3D Catan (Magnetic)](https://forum.digikey.com/t/3d-catan-magnetic/5458)

<div class="topic-metadata">

**Author:** [@jenny\_1701](https://forum.digikey.com/u/jenny_1701)\
**Replies:** 0\
**Last updated:** [February 4, 2020, 6:40pm UTC](https://forum.digikey.com/t/3d-catan-magnetic/5458 "2020-02-04T18:40:01Z")

</div>

Hello fellow Catan enthusiasts! As you have probably seen there are many custom versions of 3D Catan. All the designs that I have come across inspired me to do my own take on it. Since many Catan designers are willing t…

---

## [3D Printer Filament Holder](https://forum.digikey.com/t/3d-printer-filament-holder/3947)

<div class="topic-metadata">

**Author:** [@Nathan\_2268](https://forum.digikey.com/u/Nathan_2268)\
**Replies:** 1\
**Last updated:** [November 7, 2019, 4:21am UTC](https://forum.digikey.com/t/3d-printer-filament-holder/3947 "2019-11-07T04:21:47Z")

</div>

A few months ago we started a conversation on how to build a multiple spool holder that would work with the 3D printers in our lab. Below you will find the first version of the a single spool holder that will mount on th…

---

## [MAKER MOD BLOCK - POTENTIOMETER MOUNTING PLATE - #MMB011.1](https://forum.digikey.com/t/maker-mod-block-potentiometer-mounting-plate-mmb011-1/3140)

<div class="topic-metadata">

**Author:** [@DanKiviaho](https://forum.digikey.com/u/DanKiviaho)\
**Replies:** 0\
**Last updated:** [April 16, 2019, 6:15am UTC](https://forum.digikey.com/t/maker-mod-block-potentiometer-mounting-plate-mmb011-1/3140 "2019-04-16T06:15:03Z")

</div>

Are you looking to add a potentiometer to your next project or just looking to try using one? Then this is the block for you. The MMB011.1 has slots for up to 3 potentiometers and uses a simple 3 position IDC conne…

---

## [MAKER MOD BLOCK - UNIVERSAL MOUNTING PLATFORM - #MMB011](https://forum.digikey.com/t/maker-mod-block-universal-mounting-platform-mmb011/3137)

<div class="topic-metadata">

**Author:** [@DanKiviaho](https://forum.digikey.com/u/DanKiviaho)\
**Replies:** 0\
**Last updated:** [April 16, 2019, 6:00am UTC](https://forum.digikey.com/t/maker-mod-block-universal-mounting-platform-mmb011/3137 "2019-04-16T06:00:01Z")

</div>

Comments: The MMB011 base, as the name implies, is a universal mounting platform. We will be coming out with different plates for specific functions. Whenever a new plate is available it will be linked above. To…

---

## [Part organizer for components and boards](https://forum.digikey.com/t/part-organizer-for-components-and-boards/3205)

<div class="topic-metadata">

**Author:** [@anon65161734](https://forum.digikey.com/u/anon65161734)\
**Replies:** 0\
**Last updated:** [April 2, 2019, 2:35pm UTC](https://forum.digikey.com/t/part-organizer-for-components-and-boards/3205 "2019-04-02T14:35:03Z")

</div>

Modeling Software: Onshape 3D Printer: LulzBot TAZ 6 Comments: These are stack-able part organizers that can be used to organize components from resistors and caps to wider things like eval boards and some micro…

---

## [VEX IQ Peg Puller](https://forum.digikey.com/t/vex-iq-peg-puller/2742)

<div class="topic-metadata">

**Author:** [@Robert\_Fay](https://forum.digikey.com/u/Robert_Fay)\
**Replies:** 0\
**Last updated:** [April 2, 2019, 3:45am UTC](https://forum.digikey.com/t/vex-iq-peg-puller/2742 "2019-04-02T03:45:09Z")

</div>

I have recently been working with a small group of students at the local elementary school and the students often had difficulty removing the snap in pegs. There are a couple small versions of pullers out there, howev…

---

## [Vex IQ Practice cube](https://forum.digikey.com/t/vex-iq-practice-cube/3130)

<div class="topic-metadata">

**Author:** [@Robert\_Fay](https://forum.digikey.com/u/Robert_Fay)\
**Replies:** 0\
**Last updated:** [April 2, 2019, 3:30am UTC](https://forum.digikey.com/t/vex-iq-practice-cube/3130 "2019-04-02T03:30:05Z")

</div>

Nothing too fancy in this post. This is simply a cube I created to challenge some of my VEX IQ students stacking abilities with their claw bots. The cube has two open ends which makes it easy to grab on the ends and 4 sm…
