# \#robotics

**URL:** https://forum.digikey.com/tag/robotics/238.md

[Latest](https://forum.digikey.com/latest.md) · [Categories](https://forum.digikey.com/categories.md) · [Tags](https://forum.digikey.com/tags.md)

---

## [Programming the Schneider Lexium Cobot: Blockly Logic, Subprograms, and Standalone Operation](https://forum.digikey.com/t/programming-the-schneider-lexium-cobot-blockly-logic-subprograms-and-standalone-operation/73270)

<div class="topic-metadata">

**Author:** [@Aaron\_11657](https://forum.digikey.com/u/Aaron_11657)\
**Replies:** 0\
**Last updated:** [November 5, 2026, 8:59pm UTC](https://forum.digikey.com/t/programming-the-schneider-lexium-cobot-blockly-logic-subprograms-and-standalone-operation/73270 "2026-11-05T20:59:38Z")

</div>

Programming the Schneider Lexium Cobot: Blockly Logic, Subprograms, and Standalone Operation This is part of the Electronica 2026: Schneider Lexium Cobot Display series of articles. Note: All software steps below are ba…

---

## [Integrating a Robotiq RS-485 Gripper with the Lexium Cobot](https://forum.digikey.com/t/integrating-a-robotiq-rs-485-gripper-with-the-lexium-cobot/73122)

<div class="topic-metadata">

**Author:** [@Aaron\_11657](https://forum.digikey.com/u/Aaron_11657)\
**Replies:** 0\
**Last updated:** [October 30, 2026, 6:51pm UTC](https://forum.digikey.com/t/integrating-a-robotiq-rs-485-gripper-with-the-lexium-cobot/73122 "2026-10-30T18:51:22Z")

</div>

This is part of the Electronica 2026: Schneider Lexium Cobot Display series of articles. To make a collaborative robot useful, you need an end-effector. For my application, I did not have access to an air supply, which …

---

## [Getting Started with the Schneider Lexium Cobot: Unboxing, Hardware Setup, and Initial Commissioning](https://forum.digikey.com/t/getting-started-with-the-schneider-lexium-cobot-unboxing-hardware-setup-and-initial-commissioning/73027)

<div class="topic-metadata">

**Author:** [@Aaron\_11657](https://forum.digikey.com/u/Aaron_11657)\
**Replies:** 0\
**Last updated:** [October 28, 2026, 5:37pm UTC](https://forum.digikey.com/t/getting-started-with-the-schneider-lexium-cobot-unboxing-hardware-setup-and-initial-commissioning/73027 "2026-10-28T17:37:51Z")

</div>

Getting Started with the Schneider Lexium Cobot: Unboxing, Hardware Setup, and Initial Commissioning This is part of the Electronica 2026: Schneider Lexium Cobot Display series of articles. If you are looking to integr…

---

## [三種常見絕對值編碼器通訊協定比較：SPI、RS-485 與 SSI](https://forum.digikey.com/t/spi-rs-485-ssi/71325)

<div class="topic-metadata">

**Author:** [@Barley\_Li](https://forum.digikey.com/u/Barley_Li)\
**Replies:** 0\
**Last updated:** [August 17, 2026, 6:59am UTC](https://forum.digikey.com/t/spi-rs-485-ssi/71325 "2026-08-17T06:59:10Z")

</div>

在使用編碼器時，面對各種不同的介面規格，是否能將訊號轉換為數位形式，並透過通訊介面進行傳輸，以提升使用便利性？ 目前，絕對值編碼器（Absolute Encoder）最常見的三種通訊協定為 SPI、RS-485 與 SSI。 以下比較這三種通訊協定的關鍵參數，以及其對應用情境的影響。 1. 傳輸距離 SPI 高速傳輸時距離 ≤ 1 公尺 可透過降低傳輸速度延長傳輸距離 適用於短距離應用，例如消費性電子產品 RS-485 傳輸…

---

## [【技術深談】智慧機器人與 Physical AI：協作型機器人的新設計思維、AMR 發展與 SLAM 自主導航解析](https://forum.digikey.com/t/physical-ai-amr-slam/66549)

<div class="topic-metadata">

**Author:** [@Barley\_Li](https://forum.digikey.com/u/Barley_Li)\
**Replies:** 0\
**Last updated:** [March 13, 2026, 9:25am UTC](https://forum.digikey.com/t/physical-ai-amr-slam/66549 "2026-03-13T09:25:21Z")

</div>

機器人技術 在過去十年間，機器人技術 正快速從「需要安全柵欄隔離的大型工業機器人」進化到能與人協作的智慧機器人（含 Cobots 與 AMRs）。這些新型機器人不僅更靈活，也更能感知周遭環境，進而安全地與人共存。 以下將從三個面向，深入解析機器人技術的重要趨勢： 智慧機器人與傳統工業機器人的設計差異 AMR 的下一步將走向哪裡？ SLAM 與自主導航如何整合環境建模、障礙偵測與路徑規劃？ 一、智慧機器人的新設計考量：從固定式到具…

---

## [Contents of KR 10 R1100-2 Robot Kit](https://forum.digikey.com/t/contents-of-kr-10-r1100-2-robot-kit/64845)

<div class="topic-metadata">

**Author:** [@Kristof\_2649](https://forum.digikey.com/u/Kristof_2649)\
**Replies:** 0\
**Last updated:** [January 30, 2026, 3:29pm UTC](https://forum.digikey.com/t/contents-of-kr-10-r1100-2-robot-kit/64845 "2026-01-30T15:29:07Z")

</div>

Contents of the KR 10 R1100-2 Robot Starter Kit include the following: KR 10 R1100-2 Robotic Arm Control system KR C5 micro KUKA smartPAD ergonomic robot control panel with capacitive touch display

---

## [Let's Talk Technical with onsemi: Robotics and Physical AI](https://forum.digikey.com/t/lets-talk-technical-with-onsemi-robotics-and-physical-ai/64700)

<div class="topic-metadata">

**Author:** [@jeremy\_wiskow](https://forum.digikey.com/u/jeremy_wiskow)\
**Replies:** 0\
**Last updated:** [January 27, 2026, 9:40pm UTC](https://forum.digikey.com/t/lets-talk-technical-with-onsemi-robotics-and-physical-ai/64700 "2026-01-27T21:40:45Z")

</div>

Topic Questions Robotics have changed in the past decade, older industrial robots needed to be physically fenced off to “Smarter Robots” (like Cobots and AMRs). What new design considerations come along with these smarte…

---

## [Plug and Play GNSS for Robots](https://forum.digikey.com/t/plug-and-play-gnss-for-robots/48710)

<div class="topic-metadata">

**Author:** [@Khaled-Calian](https://forum.digikey.com/u/Khaled-Calian)\
**Replies:** 0\
**Last updated:** [January 30, 2025, 3:27pm UTC](https://forum.digikey.com/t/plug-and-play-gnss-for-robots/48710 "2025-01-30T15:27:30Z")

</div>

We are in the age of rapid Robot proliferation, where it’s a race to deliver your unique robot functionality to your customers. To that end, engineers should not be wasting their time on the design elements that don’t ne…

---

## [Webinar – 11th February 2025 - Infineon’s Mobile Robot (IMR) development platform](https://forum.digikey.com/t/webinar-11th-february-2025-infineon-s-mobile-robot-imr-development-platform/48713)

<div class="topic-metadata">

**Author:** [@Rolf\_Horn](https://forum.digikey.com/u/Rolf_Horn)\
**Replies:** 0\
**Last updated:** [January 30, 2025, 4:02pm UTC](https://forum.digikey.com/t/webinar-11th-february-2025-infineon-s-mobile-robot-imr-development-platform/48713 "2025-01-30T16:02:54Z")

</div>

Webinar – 11th February 2025 - Infineon’s Mobile Robot (IMR) robotics development platform – Experiment, innovate, accelerate! Session 1: 8 am CET 3 pm SGT Session 2: 9 am EST 3 pm CET Dear all, You’re just one step …
