# \#tech-tips

**URL:** https://forum.digikey.com/tag/tech-tips/2397.md

[Latest](https://forum.digikey.com/latest.md) · [Categories](https://forum.digikey.com/categories.md) · [Tags](https://forum.digikey.com/tags.md)

---

## [48V를 고효율 저전압으로 변환하는 아나로그디바이스의 LTM4654 μModule®](https://forum.digikey.com/t/48v-ltm4654-module/73499)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [November 17, 2026, 8:20am UTC](https://forum.digikey.com/t/48v-ltm4654-module/73499 "2026-11-17T08:20:00Z")

</div>

아나로그디바이스의 LTM4654 μModule® 레귤레이터와 같은 고집적 솔루션을 사용하면 매우 작으면서도 고전력의 하이브리드 전압 변환을 구현할 수 있습니다. 이 솔루션은 최대 55V의 DC 링크 전압을 4.5V~18V 범위 내에서 원하는 출력 전압으로 낮춰 변환할 수 있으며, 최대 300W 전력을 연속으로 처리할 수 있습니다. 그림 1은 고집적 LTM4654를 적용한 솔루션을 보여줍니다…

---

## [提高 Arduino 微控制器的電壓測量性能](https://forum.digikey.com/t/arduino/73469)

<div class="topic-metadata">

**Author:** [@Kevin\_6462](https://forum.digikey.com/u/Kevin_6462)\
**Replies:** 0\
**Last updated:** [November 16, 2026, 9:07am UTC](https://forum.digikey.com/t/arduino/73469 "2026-11-16T09:07:09Z")

</div>

如今大多數微控制器都配備了類比數位轉換器 (ADC)，但這只是類比電路中的一個元件。與之密切相關的電路包括：用於選擇待測特定訊號的類比多工器；用於獲取待測電壓「快照」的取樣保持電路；用於驅動 ADC 運行的時脈電路；以及或許是最重要的組件之一 —— 類比電壓基準。 本文將簡要介紹如何透過增加外部電壓基準來提升 Arduino Nano Every 微控制器的效能。這些方法通常也適用於其他類型的微控制器。 圖 1：試驗電路…

---

## [固態繼電器（SSR）解析：內部設計、散熱限制與 Sink／Source 配線應用](https://forum.digikey.com/t/ssr-sink-source/73463)

<div class="topic-metadata">

**Author:** [@Barley\_Li](https://forum.digikey.com/u/Barley_Li)\
**Replies:** 0\
**Last updated:** [November 16, 2026, 8:04am UTC](https://forum.digikey.com/t/ssr-sink-source/73463 "2026-11-16T08:04:37Z")

</div>

檢視 固態繼電器（SSR） 的內部結構，可以發現其包含電氣隔離、達靈頓輸出級以及突波保護等經典電路設計。本文從元件層級分析 SSR 的內部架構，並探討散熱限制以及 Sink（灌電流）與 Source（供電流）配線方式的差異。雖然 SSR 在電氣上具備高度彈性，但在實際配線應用中，硬體配置往往會影響較適合採用的接線方式。 重點摘要 採用 SO6 封裝的光達靈頓元件（Photodarlington）散熱能力有限。 輸入電壓不足是容易…

---

## [什麼是雙電路技術（Dual Circuit Technology, DCT）？一次了解 SPDT 輕觸開關的運作原理與優勢](https://forum.digikey.com/t/dual-circuit-technology-dct-spdt/73459)

<div class="topic-metadata">

**Author:** [@Barley\_Li](https://forum.digikey.com/u/Barley_Li)\
**Replies:** 0\
**Last updated:** [November 16, 2026, 6:35am UTC](https://forum.digikey.com/t/dual-circuit-technology-dct-spdt/73459 "2026-11-16T06:35:02Z")

</div>

現代電子系統往往不只需要單純的 ON/OFF 訊號，還需要能夠驗證按鍵是否確實動作，以及偵測異常狀態的能力。雙電路技術（Dual Circuit Technology，DCT）讓輕觸開關能夠提供兩組獨立輸出訊號，協助系統確認按鍵操作是否正確執行。 圖 1：採用 Dual Circuit Technology 的輕觸開關（Littelfuse KSC241J DCT LFS） 什麼是雙電路技術（Dual Circuit Te…

---

## [Omron H7EC Total Counter Debounce vs. High-Frequency Mismatch](https://forum.digikey.com/t/omron-h7ec-total-counter-debounce-vs-high-frequency-mismatch/73446)

<div class="topic-metadata">

**Author:** [@Troy\_2808](https://forum.digikey.com/u/Troy_2808)\
**Replies:** 0\
**Last updated:** [November 13, 2026, 9:39pm UTC](https://forum.digikey.com/t/omron-h7ec-total-counter-debounce-vs-high-frequency-mismatch/73446 "2026-11-13T21:39:31Z")

</div>

If you are setting up an Omron H7EC Total Counter for the first time and experiencing weird counting behavior—like the counter jumping multiple digits per pulse or completely missing high-speed signals—your issue is like…

---

## [什麼是互補電晶體對？NPN 與 PNP 電晶體的工作原理、應用與選型指南](https://forum.digikey.com/t/npn-pnp/73373)

<div class="topic-metadata">

**Author:** [@Kevin\_6462](https://forum.digikey.com/u/Kevin_6462)\
**Replies:** 0\
**Last updated:** [November 11, 2026, 8:09am UTC](https://forum.digikey.com/t/npn-pnp/73373 "2026-11-11T08:09:26Z")

</div>

互補這個術語描述了兩種不同電晶體之間的關係。一種電晶體是 NPN 型，另一種是 PNP 型。這種同族關係也延伸到 MOSFET 和 NMOS 技術中，其中一種元件是 N 通道，另一個是 P 通道。就像人手的對稱性一樣，互補半導體具有相似的結構和性能。當我們觀察到 NPN 和 PNP 元件之間的電流方向相反時，互補半導體的真正特性就顯現出來了。 最常見的互補電晶體範例之一是 2N3904 (NPN) 電晶體。2N3904 的互補電晶體是…

---

## [SPARTN 是什麼？它如何改善 GPS/GNSS 接收器的定位精度與可靠性？](https://forum.digikey.com/t/spartn-gps-gnss/73368)

<div class="topic-metadata">

**Author:** [@Kevin\_6462](https://forum.digikey.com/u/Kevin_6462)\
**Replies:** 0\
**Last updated:** [November 11, 2026, 6:02am UTC](https://forum.digikey.com/t/spartn-gps-gnss/73368 "2026-11-11T06:02:29Z")

</div>

什麼是 SPARTN？ 即時導航安全位置增強協定（Secure Position Augmentation for Real Time Navigation，簡稱SPARTN），是一種用於 GNSS（全球導航衛星系統）資料傳輸的開放協定。它用於封裝來自服務提供者基地台的各個衛星校正數據，以便有效率地傳輸到行動 GNSS 接收機，從而提供公分級的定位精度。在某種程度上，它已成為 GPS 接收機（例如圖 1 所示的 SparkFun Ele…

---

## [Why Does Power Module Height Matter in PCB Design? Understanding the LTM4732 Ultra-Thin Power Module](https://forum.digikey.com/t/why-does-power-module-height-matter-in-pcb-design-understanding-the-ltm4732-ultra-thin-power-module/73327)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [November 9, 2026, 1:47am UTC](https://forum.digikey.com/t/why-does-power-module-height-matter-in-pcb-design-understanding-the-ltm4732-ultra-thin-power-module/73327 "2026-11-09T01:47:00Z")

</div>

Question: When selecting a power module, why is package height just as important as PCB footprint in space-constrained applications? Answer: In electronic systems with limited board-to-board spacing or restricted encl…

---

## [How to Reduce External Components in a DC-DC Power Supply Design Using the LTM4732](https://forum.digikey.com/t/how-to-reduce-external-components-in-a-dc-dc-power-supply-design-using-the-ltm4732/73326)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [November 9, 2026, 1:43am UTC](https://forum.digikey.com/t/how-to-reduce-external-components-in-a-dc-dc-power-supply-design-using-the-ltm4732/73326 "2026-11-09T01:43:04Z")

</div>

Question: For a point-of-load (PoL) power supply requiring a 12 V input and a 1 V/4 A output, how does the LTM4732 simplify the external circuitry? Answer: The LTM4732 integrates the switching controller, power MOSFET…

---

## [Does an Ultra-Thin Power Module Affect Efficiency and Thermal Performance? LTM4732 Explained](https://forum.digikey.com/t/does-an-ultra-thin-power-module-affect-efficiency-and-thermal-performance-ltm4732-explained/73324)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [November 9, 2026, 1:41am UTC](https://forum.digikey.com/t/does-an-ultra-thin-power-module-affect-efficiency-and-thermal-performance-ltm4732-explained/73324 "2026-11-09T01:41:39Z")

</div>

Question: With a package height of only 1.92 mm, how can engineers evaluate the efficiency and thermal performance of the LTM4732 under actual load conditions? Answer: Power conversion efficiency and temperature rise …

---

## [How to Reduce Radiated EMI Without an External EMI Filter Using the LTM4732](https://forum.digikey.com/t/how-to-reduce-radiated-emi-without-an-external-emi-filter-using-the-ltm4732/73323)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [November 9, 2026, 1:39am UTC](https://forum.digikey.com/t/how-to-reduce-radiated-emi-without-an-external-emi-filter-using-the-ltm4732/73323 "2026-11-09T01:39:17Z")

</div>

Question: In high-density PCB designs with limited layout space, how does the LTM4732 reduce radiated electromagnetic interference (EMI) without requiring an external EMI filter? Answer: Radiated EMI from switching re…

---

## [How to Interpret Output Noise PSD and Integrated RMS Noise in DC-DC Power Supplies](https://forum.digikey.com/t/how-to-interpret-output-noise-psd-and-integrated-rms-noise-in-dc-dc-power-supplies/73321)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [November 9, 2026, 1:35am UTC](https://forum.digikey.com/t/how-to-interpret-output-noise-psd-and-integrated-rms-noise-in-dc-dc-power-supplies/73321 "2026-11-09T01:35:01Z")

</div>

Question: When evaluating power supply quality for noise-sensitive loads, how should engineers interpret output noise power spectral density (PSD) and integrated output noise in a switching regulator? Answer: Two diff…

---

## [How to Increase Output Current Using Multiphase Parallel Operation with the LTM4732](https://forum.digikey.com/t/how-to-increase-output-current-using-multiphase-parallel-operation-with-the-ltm4732/73320)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [November 9, 2026, 1:33am UTC](https://forum.digikey.com/t/how-to-increase-output-current-using-multiphase-parallel-operation-with-the-ltm4732/73320 "2026-11-09T01:33:09Z")

</div>

Question: If the required load current exceeds the 4 A capability of a single LTM4732, can multiple devices be connected in parallel to increase the available output current? Answer: Yes. The LTM4732 supports multipha…

---

## [Programming the Schneider Lexium Cobot: Blockly Logic, Subprograms, and Standalone Operation](https://forum.digikey.com/t/programming-the-schneider-lexium-cobot-blockly-logic-subprograms-and-standalone-operation/73270)

<div class="topic-metadata">

**Author:** [@Aaron\_11657](https://forum.digikey.com/u/Aaron_11657)\
**Replies:** 0\
**Last updated:** [November 5, 2026, 8:59pm UTC](https://forum.digikey.com/t/programming-the-schneider-lexium-cobot-blockly-logic-subprograms-and-standalone-operation/73270 "2026-11-05T20:59:38Z")

</div>

Programming the Schneider Lexium Cobot: Blockly Logic, Subprograms, and Standalone Operation This is part of the Electronica 2026: Schneider Lexium Cobot Display series of articles. Note: All software steps below are ba…

---

## [Tech tip: How to size a 24 V DIN rail power supply: reserve, temperature and mounting](https://forum.digikey.com/t/tech-tip-how-to-size-a-24-v-din-rail-power-supply-reserve-temperature-and-mounting/73202)

<div class="topic-metadata">

**Author:** [@luca.woehrle](https://forum.digikey.com/u/luca.woehrle)\
**Replies:** 0\
**Last updated:** [November 3, 2026, 3:54pm UTC](https://forum.digikey.com/t/tech-tip-how-to-size-a-24-v-din-rail-power-supply-reserve-temperature-and-mounting/73202 "2026-11-03T15:54:28Z")

</div>

Adding up the load currents is the starting point for sizing a 24 V DIN rail power supply. Whether the unit really delivers enough power in the cabinet also depends on the ambient temperature, the mounting position, peak…

---

## [Understanding Dual Circuit Technology in Tactile Switches](https://forum.digikey.com/t/understanding-dual-circuit-technology-in-tactile-switches/73178)

<div class="topic-metadata">

**Author:** [@Barley\_Li](https://forum.digikey.com/u/Barley_Li)\
**Replies:** 0\
**Last updated:** [November 3, 2026, 3:58am UTC](https://forum.digikey.com/t/understanding-dual-circuit-technology-in-tactile-switches/73178 "2026-11-03T03:58:12Z")

</div>

Modern electronic systems often require more than a simple ON/OFF signal. Dual Circuit Technology (DCT) allows a tactile switch to provide two independent outputs, helping the system verify that a button press has occurr…

---

## [Thyristor Application Notes](https://forum.digikey.com/t/thyristor-application-notes/73171)

<div class="topic-metadata">

**Author:** [@rick\_1976](https://forum.digikey.com/u/rick_1976)\
**Replies:** 0\
**Last updated:** [November 2, 2026, 11:08pm UTC](https://forum.digikey.com/t/thyristor-application-notes/73171 "2026-11-02T23:08:16Z")

</div>

Sometime prior to its acquisition in 2003 by Littelfuse, a company named Teccor produced a series of application notes on thyristor devices (Triacs, SCRs, and similar) which have been found to be of unique value. As a t…

---

## [How to set up out-of-band console access to a switch or router with the Digi Connect IT 16](https://forum.digikey.com/t/how-to-set-up-out-of-band-console-access-to-a-switch-or-router-with-the-digi-connect-it-16/73156)

<div class="topic-metadata">

**Author:** [@DigiIMChannelManager](https://forum.digikey.com/u/DigiIMChannelManager)\
**Replies:** 0\
**Last updated:** [November 2, 2026, 3:16pm UTC](https://forum.digikey.com/t/how-to-set-up-out-of-band-console-access-to-a-switch-or-router-with-the-digi-connect-it-16/73156 "2026-11-02T15:16:04Z")

</div>

Out-of-band (OOB) management gives you a path to a device’s console when the production network is down. This walkthrough connects a switch console to a Connect IT 16 and covers how to reach it remotely. What you need …

---

## [Tech tip: Sizing a 24 V DC power supply with reserve for start-up loads](https://forum.digikey.com/t/tech-tip-sizing-a-24-v-dc-power-supply-with-reserve-for-start-up-loads/73146)

<div class="topic-metadata">

**Author:** [@luca.woehrle](https://forum.digikey.com/u/luca.woehrle)\
**Replies:** 0\
**Last updated:** [November 2, 2026, 9:31am UTC](https://forum.digikey.com/t/tech-tip-sizing-a-24-v-dc-power-supply-with-reserve-for-start-up-loads/73146 "2026-11-02T09:31:00Z")

</div>

A 24 V DC supply has to cover the steady-state load, but the peak during start-up matters just as much. Motors, relays, and contactors draw more current than their nameplate values when they switch on. Add up the contin…

---

## [Measuring Low-Ohm Resistors: The Four-Terminal Kelvin Method](https://forum.digikey.com/t/measuring-low-ohm-resistors-the-four-terminal-kelvin-method/73121)

<div class="topic-metadata">

**Author:** [@raelynn.roen](https://forum.digikey.com/u/raelynn.roen)\
**Replies:** 1\
**Last updated:** [November 2, 2026, 2:02am UTC](https://forum.digikey.com/t/measuring-low-ohm-resistors-the-four-terminal-kelvin-method/73121 "2026-11-02T02:02:13Z")

</div>

A concern we regularly get from customers is low-value resistors that seem to be out of specification when measured. Ranging from simple ten or one-ohm parts down to mili-ohm or lower shunt resistors, customers often te…

---

## [Integrating a Robotiq RS-485 Gripper with the Lexium Cobot](https://forum.digikey.com/t/integrating-a-robotiq-rs-485-gripper-with-the-lexium-cobot/73122)

<div class="topic-metadata">

**Author:** [@Aaron\_11657](https://forum.digikey.com/u/Aaron_11657)\
**Replies:** 0\
**Last updated:** [October 30, 2026, 6:51pm UTC](https://forum.digikey.com/t/integrating-a-robotiq-rs-485-gripper-with-the-lexium-cobot/73122 "2026-10-30T18:51:22Z")

</div>

This is part of the Electronica 2026: Schneider Lexium Cobot Display series of articles. To make a collaborative robot useful, you need an end-effector. For my application, I did not have access to an air supply, which …

---

## [Technical Inquiry and Availability Request for STEVAL-16GZMAI1 Camera](https://forum.digikey.com/t/technical-inquiry-and-availability-request-for-steval-16gzmai1-camera/73017)

<div class="topic-metadata">

**Author:** [@nguyenviethunghc2](https://forum.digikey.com/u/nguyenviethunghc2)\
**Replies:** 1\
**Last updated:** [October 28, 2026, 7:36pm UTC](https://forum.digikey.com/t/technical-inquiry-and-availability-request-for-steval-16gzmai1-camera/73017 "2026-10-28T19:36:56Z")

</div>

I have some technical questions: 1. VIS and NIR Operating Modes Does the camera support independent operation in Visible (VIS) and Near-Infrared (NIR) modes? Is it possible to switch between VIS and NIR modes thro…

---

## [Getting Started with the Schneider Lexium Cobot: Unboxing, Hardware Setup, and Initial Commissioning](https://forum.digikey.com/t/getting-started-with-the-schneider-lexium-cobot-unboxing-hardware-setup-and-initial-commissioning/73027)

<div class="topic-metadata">

**Author:** [@Aaron\_11657](https://forum.digikey.com/u/Aaron_11657)\
**Replies:** 0\
**Last updated:** [October 28, 2026, 5:37pm UTC](https://forum.digikey.com/t/getting-started-with-the-schneider-lexium-cobot-unboxing-hardware-setup-and-initial-commissioning/73027 "2026-10-28T17:37:51Z")

</div>

Getting Started with the Schneider Lexium Cobot: Unboxing, Hardware Setup, and Initial Commissioning This is part of the Electronica 2026: Schneider Lexium Cobot Display series of articles. If you are looking to integr…

---

## [電源供應器負載測試指南：如何選擇電子負載與功率電阻進行驗證](https://forum.digikey.com/t/topic/73007)

<div class="topic-metadata">

**Author:** [@Barley\_Li](https://forum.digikey.com/u/Barley_Li)\
**Replies:** 0\
**Last updated:** [October 28, 2026, 1:40am UTC](https://forum.digikey.com/t/topic/73007 "2026-10-28T01:40:51Z")

</div>

在測試電源供應器（Power Supply）時，可根據測試需求與預算選擇不同類型的負載設備。常見的方式包括電子負載測試儀（Electronic Load）以及功率電阻（Power Resistor），每種方案皆有其優勢與適用場景。 電子負載測試儀 B&K Precision 8540 電子負載測試儀 DC Electronic Load 市面上有許多桌上型電子負載測試儀，例如上圖所示的 B&K Precision 8540。此…

---

## [Tech tip: Supercapacitor or battery for a 24 V DC UPS? Estimating the buffer time](https://forum.digikey.com/t/tech-tip-supercapacitor-or-battery-for-a-24-v-dc-ups-estimating-the-buffer-time/72903)

<div class="topic-metadata">

**Author:** [@luca.woehrle](https://forum.digikey.com/u/luca.woehrle)\
**Replies:** 0\
**Last updated:** [October 24, 2026, 11:38am UTC](https://forum.digikey.com/t/tech-tip-supercapacitor-or-battery-for-a-24-v-dc-ups-estimating-the-buffer-time/72903 "2026-10-24T11:38:16Z")

</div>

A 24 V DC UPS keeps controllers, IPCs, HMIs and sensors running when the mains fails. The first design decision is the energy storage: supercapacitors or batteries. This tip shows how to choose and how to estimate the bu…

---

## [효율적인 MOSFET 구동 기법: 고속 스위칭을 위한 푸시풀 및 부트스트랩 토폴로지](https://forum.digikey.com/t/mosfet/72736)

<div class="topic-metadata">

**Author:** [@Brian\_Lee](https://forum.digikey.com/u/Brian_Lee)\
**Replies:** 0\
**Last updated:** [October 19, 2026, 4:56am UTC](https://forum.digikey.com/t/mosfet/72736 "2026-10-19T04:56:40Z")

</div>

이전 글에서는 하측(low-side) 및 상측(high-side) MOSFET 구동 방식과 같은 기본적인 구동 토폴로지에 대해 살펴보았습니다. 그러나 전력 소자가 진화하여 스위칭 속도가 높아지고 효율도 향상됨에 따라, 기존의 하측 및 상측 구동 방식으로는 성능과 신뢰성 측면에서 부족할 수 있습니다. 이런 경우, 푸시풀 및 부트스트랩 구동과 같은 고급 구동 토폴로지가 최적의 해결책이 될 뿐만…

---

## [What is the role of the LTM8063 buck converter in the Back up battery system?](https://forum.digikey.com/t/what-is-the-role-of-the-ltm8063-buck-converter-in-the-back-up-battery-system/72689)

<div class="topic-metadata">

**Author:** [@aayushi.nainwal1](https://forum.digikey.com/u/aayushi.nainwal1)\
**Replies:** 0\
**Last updated:** [October 15, 2026, 11:17am UTC](https://forum.digikey.com/t/what-is-the-role-of-the-ltm8063-buck-converter-in-the-back-up-battery-system/72689 "2026-10-15T11:17:44Z")

</div>

To power up the alarm, which is originally powered by a 3V lithium battery. A 12V wall cube adaptor was repurposed for the main power supply. Therefore, a 12V to 6V buck converter was needed. Since there was a radio fre…

---

## [輸入電壓範圍比（Input-Range Ratio）：DC-DC 轉換器選型實用指南](https://forum.digikey.com/t/input-range-ratio-dc-dc/72686)

<div class="topic-metadata">

**Author:** [@Angus\_Lai](https://forum.digikey.com/u/Angus_Lai)\
**Replies:** 0\
**Last updated:** [October 15, 2026, 10:06am UTC](https://forum.digikey.com/t/input-range-ratio-dc-dc/72686 "2026-10-15T10:06:35Z")

</div>

DC-DC 轉換器的輸入電壓範圍比（Input-Range Ratio），是用單一數值來描述其可接受輸入電壓範圍的寬度。這個概念適用於各類 DC-DC 轉換器，但本文主要聚焦於小型 PCB 板載式 DC-DC 轉換器，如圖 1 所示。 作者： Aaron Dahlen，MSEE，DigiKey 資深應用工程師 最後更新： 2026 年 7 月 30 日 重點摘要（Key Takeaways） 輸入範圍比的計算方式： Inp…

---

## [How to Use .STEP and .MEAS to Compare RMS Values at Different DC Offsets in LTspice？](https://forum.digikey.com/t/how-to-use-step-and-meas-to-compare-rms-values-at-different-dc-offsets-in-ltspice/72660)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [October 14, 2026, 7:12am UTC](https://forum.digikey.com/t/how-to-use-step-and-meas-to-compare-rms-values-at-different-dc-offsets-in-ltspice/72660 "2026-10-14T07:12:13Z")

</div>

Question: How can you sweep the DC offset of the same sine wave from 0 V to 5 V without editing the voltage source and recording the results manually each time? Answer: Define the offset as a parameter, then combine .ST…

---

## [How to Use .MEAS to Calculate Average Voltage, RMS Voltage, Current, and Power in LTspice？](https://forum.digikey.com/t/how-to-use-meas-to-calculate-average-voltage-rms-voltage-current-and-power-in-ltspice/72659)

<div class="topic-metadata">

**Author:** [@Alan\_Yang](https://forum.digikey.com/u/Alan_Yang)\
**Replies:** 0\
**Last updated:** [October 14, 2026, 7:11am UTC](https://forum.digikey.com/t/how-to-use-meas-to-calculate-average-voltage-rms-voltage-current-and-power-in-ltspice/72659 "2026-10-14T07:11:22Z")

</div>

Question: If you want to record several measurements automatically, do you have to click each waveform trace manually? Answer: No. You can use .MEAS directives to write measurement results to the SPICE Output Log when a…

[Next page](https://forum.digikey.com/tag/tech-tips/2397.md?match_all_tags=true&page=1&tags%5B%5D=tech-tips)
