Amphenol connector compatibility- strain relief vs clamp

Support Q&A
1

------Question for BD-06BFFA-LL7001 Please Put your question below------

Hi there,

I am using this connector

To connect to the above one I use cable-mount type
digikey.ca/en/products/detail/amphenol-industrial-operations/MS3106A14S-6P/2128403
and
digikey.ca/en/products/detail/amphenol-industrial-operations/97-3057-1007-1/341005

My Question:
Is there equivalent part to MS3106A14S-6P that uses strain relief instead of clamp and tube( 97-3057-1007-1) ?
Something like this digikey.ca/en/products/detail/conxall-switchcraft/3282-6PG-3DC/526187 but compatible with MS3102E14S-6S

Thanks in advance!
Cheers,
Sam

2

Hello sbsheridan,

Welcome to the DigiKey TechForum.
I’m sorry, but we do not have a mating connector to MS3102E14S-6S, that has a different strain Relief, than the ones like you have used, with the clamp on the back. There are some without the bushing (tube), but will still be the same type of clamp.
Nothing with a cable gland type compression fitting.