------Question for TNM, PIN SIGNAL, SIZE 14 (BULK PACK 25) Please Put your question below------
Hello jgaler,
Welcome to the DigiKey TechForum.
We have no information on, the standard 14 pin connector, that would be on your equipment.
Please provided photos and any numbers on your connector, along with the wire awg size, and what plating you need on the contacts. With this information, we can see if we have any contacts that may be compatible for your connector.
With the specs I provided can you tell me a part number to order.
Hey David, are you able to provide a part number with the specs that I sent??
Hello, Jgaler.
Unfortunately the physical dimensions of the contact are of very limited use in locating the device. Are you able to provide part numbers or specifications for the connector housing you’re looking for contacts for, instead? By far the surest way to locate replacement contacts for a connector is to identify the connector, then locate the contacts associated with that connector rather than trying to identify the contact directly.
Use this link
Assuming the connector is part of the Deutsch HD30 series, such as this connector:
The associated contact options are these guys:
- 0462-201-16141 CONN SCKT 16-20AWG NICKEL CRIMP
- 0462-209-16141 CONN SOCKET 14AWG NICKEL CRIMP
Excellent! Thank you.