Hi @RobertCNelson, I made the changes and this is what I see -
[ 3.086644] pinctrl-single 44e10800.pinmux: pin PIN96 already requested by ocp:P9_26_pinmux; cannot claim for 2-0034
[ 3.097638] pinctrl-single 44e10800.pinmux: pin-96 (2-0034) status -22
[ 3.104212] pinctrl-single 44e10800.pinmux: could not request pin 96 (PIN96) from group pinmux_edt_ft5x06_pins on device pinctrl-single
[ 3.116536] edt_ft5x06 2-0034: Error applying setting, reverse things back
[ 3.123526] edt_ft5x06: probe of 2-0034 failed with error -22
I didn’t load any other overlay or anything that might request P9_26. I do have the cape universal overlay enabled as shown in my uEnv.txt below -
uname_r=4.19.212-bone-rt-r71
enable_uboot_overlays=1
disable_uboot_overlay_video=1
uboot_overlay_addr4=/lib/firmware/BB-BONE-POWERTIP-TRY1.dtbo
enable_uboot_cape_universal=1